-
Click Select .
-
Select the volume for which you want to modify the path.
You can modify the volume's path only if you created that volume using Place Volume Along Path Command .
-
Click Path .
The software displays the path in yellow.
-
To add one or more segments to the path, click Create.
-
Click the point on the existing path where you want to insert the new segment. You can use PinPoint Command , Point Along Command , and the SmartSketch relationship indicators when defining your path.
-
You can change the plane for the path by selecting a different plane in the Plane list.
-
To change the segment from a straight line to an arc, click Arc by 3 Points in the Path Type list, and then click three points to define the arc.
-
To switch back to a straight line after sketching an arc, click Line in the Path Type list.
-
To break the path, click No Line in the Path Type list.
-
-
Click to place other points and add to the path as needed. To change the turn type for the corner, click a different turn type in the Turn Type list, and define the dimensions for the turn in the Value box.
-
Click Finish to accept the path changes.
-
Click Finish to modify the volume.