Create an alias tag pattern - HxGN SDx - Update 64 - Administration & Configuration

This functionality was modified in an update. For more information, see Create an alias tag pattern.

1. On the Associated Alias Tag Patterns page, click Create Alias Tag Pattern to display the tag parts in the Create Alias Tag Pattern section.

   If there is no alias tag pattern associated with a master tag pattern, then the tag parts of the master tag pattern are displayed in the Create Alias Tag Pattern section. The example alias tag pattern box also displays the example master tag pattern by default.

2. Select a tag part and click Set Part to make changes to the tag part pattern.

   If you create the master tag pattern using regular expressions, the corresponding alias tag pattern must be created using regular expressions.

3. Add or delete the tag parts to set the alias tag pattern.

   You can add and delete constants in the alias tag pattern.

4. Click Apply to create the alias tag pattern.

   Click Discard to reject the changes.

   The tag pattern and the example tag pattern must match or an error message is displayed.

5. On the Associated Alias Tag Patterns page, click Save to save the newly created alias tag patterns and relate them to the master tag pattern.

If you want to divide a single word in the tag pattern into two tag parts, use the None separator within the two tag parts and assign a tag naming system for each tag part. For example, for a tag pattern like 1409-SV10-144, you can split the part SV10 into two tag parts with a None separator between them. The first part SV can be set to tag type and 10 can be set to unit.

You cannot edit, merge, split, and delete a tag part that is available in the master tag pattern.

What do you want to do?

• Add a part

• Arrange the parts to build a tag pattern

• Delete a part

• Edit the pattern for a tag part

• Merge multiple parts

• Split a part