Skirt - CADWorx - Help

CADWorx Equipment

Language
English
Product
CADWorx
Subproduct
Equipment
Search by Category
Help
CADWorx Version
20.2
CADWorx Structure Version
4.2

Mouse Icon Toolbar: EQP Skirt ICON

Specifies the parameters of the skirt.

Description

Specifies an alphanumeric description for the component. This description is visible even when the component is collapsed in the grid.

Length

Specifies the distance from the starting point to the ending point of the component.

Diameter Basis

Specifies either the inside or outside diameter. Select the diameter type from the list.

Diameter

Specifies the diameter of the component based on the Diameter Basis value.

Thickness

Specifies the component thickness.

Flip Orientation

Reverses the orientation of the component.

Material

Displays the Select Item dialog box, which lets you select the material from the list. For more information, see Select Item Dialog Box. The Select Item dialog box uses the file specified by the MaterialFile configuration file variable. For more information, see MaterialFile.

Basering Type

Specifies the type of basering to attach to the skirt. Available options are:

  • None

  • Simple - No Gussets

  • With Gussets

  • With Top Plates

  • Continuous Top Plate

Base Diameter

Specifies the skirt base diameter.

Basering ID

Specifies the component inner diameter.

Basering OD

Specifies the component outer diameter.

Bottom Plate Thickness

Specifies the component thickness.

Top Plate Radial Width

Specifies the component width.

Top Plate Thickness

Specifies the component thickness.

Top Plate Width

Specifies the component width.

Gusset Height

Specifies the component height.

Gusset Width

Specifies the skirt gusset width.

Distance Between Gussets

Specifies the distance between gussets on the skirt.

Gusset Thickness

Specifies the component thickness.

Number Of Bolts

Specifies the number of bolts on the skirt.

Insulation

Displays the Insulation dialog box. For more information, see Insulation Dialog Box.