Toolbar:
Specifies the parameters of the box.
Description
Specifies an alphanumeric description for the component. This description is visible even when the component is collapsed in the grid.
Dimension basis
Specifies either the inside or outside dimension. Select the dimension type from the list.
Length
Specifies the distance from the starting point to the ending point of the component.
Width
Specifies the component width.
Height
Specifies the component height.
Thickness
Specifies the component thickness.
Start offset X
Specifies an offset distance along the box X-axis. This value is applied at the start point of the box.
Start offset Y
Specifies an offset distance along the box Y-axis. This value is applied at the start point of the box.
End offset X
Specifies an offset distance along the box Y-axis of the box. This value is applied at the end point of the box.
End offset Y
Specifies an offset distance along the box Y-axis. This value is applied at the end point of the box.
Rotation angle
Specifies a box rotation angle.
Insulation
Displays the Insulation dialog box. For more information, see Insulation Dialog Box.