CADWorx Plant tab: Dimensions
Command Name |
Command Line |
|
Automatic - Automatically creates dimensions for a set of components that you select. For more information, see Automatic. |
AUTODIM |
|
Horizontal - Places horizontal dimensions. For more information, see Horizontal. |
DIMH |
|
Vertical - Places vertical dimensions. For more information, see Vertical. |
DIMV |
|
Set - Sets the elevation. For more information, see Set. |
ELEV |
|
Rotated - Places rotated dimensions. For more information, see Rotated. |
DIMR |
|
Horizontal with Tail - Places tailed horizontal dimensions on objects from a user-selected reference point. For more information, see Horizontal with Tail. |
DIMTAILH |
|
Vertical with Tail - Places tailed vertical dimensions on objects from a user-selected reference point. For more information, see Vertical with Tail. |
DIMTAILV |
|
Change - Changes the elevation. For more information, see Change. |
CHANGEELEV |
|
Component - Places component annotation. For more information, see Component. |
ANOTCOMP |
|
Elevation - Places component elevation annotation. For more information, see Elevation. |
ANOTELEV |
|
Coordinates - Places coordinates in either a user coordinate system or a world coordinate system. For more information, see Coordinates. |
DIMCOORD |
|
Tick Mark - Shows which side of the dimension extension line the gasket is on. For more information, see Tick Mark. |
TICK |
|
ISO Text - Creates 0, 30, and 330 oblique angled text in paper space when working with isometrics. For more information, see ISO Text. |
||
Height - Changes the height of selected text by matching it with other text. For more information, see Height. |
TEXTHEIGHT |