Default value: 0
Allowed values: 0, 1, 2, or 3
Specifies bolt placement in the Plant Isogen bill of material schedules.
-
0
Places the quantity for a set in the pre-CADWorx 2002 format, such as:
QUANTITY = 4, ALPHA_SIZE = 3/4", LONG_DESC = (8) Studs with nuts.
-
1
Places the quantity for total bolts, and strips the set number from the long description, such as:
QUANTITY = 32, ALPHA_SIZE = 3/4", LONG_DESC = Studs with nuts.
-
2
Places the quantity for a set, the alpha size based on the flange size, and appends the bolt diameter to the long description, such as:
QUANTITY = 4, ALPHA_SIZE = 12", LONG_DESC = (8) 3/4" Studs with nuts.
-
3
Places the quantity for total bolts, strips the set number from the long description, places the alpha size based on the flange size, and appends the bolt diameter to the long description, such as:
QUANTITY = 32, ALPHA_SIZE = 12", LONG_DESC = 3/4" Studs with nuts.
-
When this option is set to 1 or 3, the long description of the bolt must contain the number of bolts in the set enclosed by parenthesis. The software uses the value in parenthesis as the new quantity. The number is then automatically removed from the long description when displayed in the material list.
-
To make changes to non-Isogen bill of material bolt contols, see Bill of Material Settings.