Enter Radius
-
Click Adjustable Bend
on the Buttweld toolbar in the Miters drop-down. Alternatively, type BENT on the command line, and then press ENTER.
-
Type a radius on the command line, and then press ENTER.
-
Select a center point.
-
Select a first direction.
-
Select a second direction.
-
Type a Tangent length on the command line, and then press ENTER.
The adjustable bend displays in the drawing.
Select Arc
-
Type ARC on the command line, and then draw an arc.
-
Click Adjustable Bend
on the Buttweld toolbar in the Miters drop-down. Alternatively, type BENT on the command line, and then press ENTER.
-
Click Select Arc.
-
Select the arc in the drawing.
-
Type a Tangent length on the command line, and then press ENTER.
The adjustable bend displays in the drawing.
Trimmed Elbow
-
Click Adjustable Bend
on the Buttweld toolbar in the Miters drop-down. Alternatively, type BENT on the command line, and then press ENTER.
-
Select Trimmed Elbow.
-
Select a corner point.
-
Select a first direction.
-
Select a second direction.
-
Select Long radius or Short radius.
The adjustable bend displays in the drawing.