This is a comprehensive list of all the commands available in CADWorx Plant Professional. These commands are listed in alphabetical order.
Command |
Command Summary |
|
— |
Socket Weld - Sets the socket welded fitting mode for hub-based components. For more information, see Socket Weld. |
|
— |
Threaded - Sets the threaded fitting mode for hub-based components. For more information, see Threaded. |
|
11EN |
Sanitary 11.25 Ell Plan - Places an 11.25 degree sanitary elbow in the X-Y plane. For more information, see Sanitary 11.25 Ell Plan. |
|
11LR |
Plan 11.25 Ell - Places an 11.25 degree elbow in the X-Y plane. For more information, see Plan 11.25 Ell. |
|
18LR |
Plan 180 LR Return - Places a 180 degree long radius return in the X-Y plane. For more information, see Plan 180 LR Return. |
|
18SR |
Plan 180 SR Return - Places a 180 degree short radius return in the X-Y plane. For more information, see Plan 180 SR Return. |
|
22EN |
Sanitary 22.5 Ell Plan - Places a 22.5 degree sanitary elbow in the X-Y plane. For more information, see Sanitary 22.5 Ell Plan. |
|
22LR |
Plan 22.5 Ell - Places a 22.5 degree elbow in the X-Y plane. For more information, see Plan 22.5 Ell. |
|
2DREP |
2D Representation - Creates a 2D representation. For more information, see 2D Representation. |
|
2DREPH |
2D Representation Hidden - Creates a 2D representation with hidden lines. For more information, see 2D Representation Hidden. |
|
3VE |
Sanitary 3-Way Valve Plan - Places a sanitary 3-way valve component in the X-Y plane. For more information, see Sanitary 3-Way Valve Plan. |
|
3VF |
3 Way Plan - Places a three-way valve component in the X-Y plane. For more information, see 3-Way Plan Valve. |
|
3VS/3VT |
Thrd/SW 3 Way Plan - Places a threaded or socket weld three-way valve in the X-Y plane. For more information, see Thrd/SW 3 Way Plan. |
|
45EN |
Sanitary 45 Ell Plan - Places a 45 degree sanitary elbow in the X-Y plane. For more information, see Sanitary 45 Ell Plan. |
|
45FL |
Lined 45 Ell Plan - Places a 45 degree flanged and lined elbow in the X-Y plane. For more information, see Flanged 45 Degree Elbow Plan. |
|
45LR |
Plan 45 Ell - Places a 45 degree elbow in the X-Y plane. For more information, see Plan 45 Ell. |
|
45S |
FRP Bell 45 Ell Plan - Places a 45 degree threaded/socket elbow in the X-Y plane. For more information, see Threaded/Socket 45 Degree Elbow Plan. |
|
45S/45T |
Thrd/SW 45 Ell Plan - Places a 45 degree threaded/socket elbow in the X-Y plane. For more information, see Thrd/SW 45 Ell Plan. |
|
45SS |
SW 45 Street - Place a 45 degree socket weld street elbow in the X-Y plane. |
|
45ST |
Thrd/SW 45 Street - Place a 45 degree socket threaded street elbow in the X-Y plane. |
|
4VF |
4 Way Plan - Places a four-way valve component in the X-Y plane. For more information, see 4-Way Plan Valve. |
|
4VS/4VT |
Thrd/SW 4 Way Plan - Places a threaded or socket weld four-way valve in the X-Y plane. For more information, see Thrd/SW 4 Way Plan. |
|
90EN |
Sanitary 90 Ell Plan - Places a 90 degree elbow in the X-Y plane. For more information, see Sanitary 90 Ell Plan. |
|
90FL |
Lined 90 Ell Plan - Places a 90 degree flanged and lined elbow in the X-Y plane. For more information, see Flanged 90 Degree Elbow Plan. |
|
90LR |
Plan 90 LR Ell - Places a 90 degree long radius elbow in the X-Y plane. For more information, see Plan 90 LR Ell. |
|
90RD |
Plan 90 Reducing Ell - Places a 90 degree reducing elbow in the X-Y plane. For more information, see Plan 90 Reducing Ell. |
|
90RE |
Sanitary 90 Reducing Ell Plan - Places a 90 degree reducing elbow in the X-Y plane. For more information, see Sanitary 90 Reducing Ell Plan. |
|
90RS/90RT |
Thrd/SW 90 Red Ell Plan - Places a 90 degree threaded/socket reducing elbow in the X-Y plane. For more information, see Thrd/SW 90 Red Ell Plan. |
|
90S |
FRP Bell 90 Ell Plan - Places a 90 degree threaded/socket elbow in the X-Y plane. For more information, see Plan Threaded/Socket 90 Degree Elbow. |
|
90S/90T |
Thrd/SW 90 Ell Plan - Places a 90 degree threaded/socket elbow in the X-Y plane. For more information, see Thrd/SW 90 Ell Plan. |
|
90SR |
Plan 90 SR Ell - Places a 90 degree short radius elbow in the X-Y plane. For more information, see Plan 90 SR Ell. |
|
90SS/90ST |
Thrd/SW 90 Street Ell Plan - Places a 90 degree threaded/socket street elbow in the X-Y plane. For more information, see Thrd/SW 90 Street Ell Plan. |
|
ADDGRAPHICS |
Add Graphics - Adds insulation graphics to components that have had their graphics removed. The data previously stored in the components is used to generate the graphics. For more information, see Apply Tab (CADWorx Insulation View Palette). |
|
ADDINSULATION |
Add Insulation - Adds the insulation currently selected in the Available Configuration grid to components in the drawings. You are prompted to select CADWorx components. If any of the selected components are already insulated, this action is skipped. For more information, see Apply Tab (CADWorx Insulation View Palette). |
|
AIR1 |
Sanitary Multi 1 Port Valve - Places a one-port pneumatic actuator air valve. For more information, see Sanitary Multi 1 Port Valve. |
|
AIR2 |
Sanitary Multi 2 Port Valve - Places a two-port pneumatic actuator air valve. For more information, see Sanitary Multi 2 Port Valve. |
|
AIR3 |
Sanitary Multi 3 Port Valve - Places a three-port pneumatic actuator air valve. For more information, see Sanitary Multi 3 Port Valve. |
|
ANCHOR |
Anchor - Creates an anchor-type restraint. For more information, see Anchor. |
|
ANGE |
Sanitary Angle Valve Plan - Places a 90 degree sanitary angle valve in the X-Y plane. For more information, see Sanitary Angle Valve Plan. |
|
ANGF |
Angle Top - Places a 90 degree angle valve in the X-Y plane. For more information, see Angle Top Valve. |
|
ANGS/ANGT |
Thrd/SW Angle Top - Places a threaded or socket weld 90 degree angle valve in the X-Y plane. For more information, see Thrd/SW Angle Top. |
|
ANOTCOMP |
Component - Places component annotation. For more information, see Component. |
|
ANOTELEV |
Elevation - Places component elevation annotation. For more information, see Elevation. |
|
ARROWS |
Arrow - Opens the Arrows dialog box in which you can select an arrow head graphic to place on the drawing. For more information, see Arrow. |
|
ASSEMBLYCLOSE |
Assembly Close - Closes the Assembly Palette. |
|
ASSEMBLYEDITPATHS |
Assembly Edit Paths - Edits the path folder location of the assembly. For more information, see Assembly View. |
|
ASSEMBLYVIEW |
Assembly View - Creates an assembly for use in a drawing. For more information, see Assembly View. |
|
AUTOBOLT |
Automatic - Sizes and places stud bolts automatically at each gasket. For more information, see Automatic. |
|
AUTODIM |
Automatic - Automatically creates dimensions for a set of components that you select. For more information, see Automatic. |
|
AUTOGASKET |
Auto Gasket - Place gaskets automatically after the last flange face drawn. For more information, see Auto Gasket. |
|
AUTOROUTE, ROUTE |
Auto Route - Provides the ability to draw components continuously without selecting them from the toolbar or palette. For more information, see Auto Route. |
|
AUTOROUTEFLG |
Auto Route Flanged - Configure Auto Route to default to flanged piping components. For more information, see Auto Route. |
|
AUTOROUTELR |
Auto Route Long Radius - Configure Auto Route to default to long radius elbow piping components. For more information, see Auto Route. |
|
AUTOROUTESPECEND |
Auto Route Special End - Configure Auto Route to default to special end piping components. For more information, see Auto Route. |
|
AUTOROUTESR |
Auto Route Short Radius - Configure Auto Route to default to short radius elbow piping components. For more information, see Auto Route. |
|
AUTOROUTESW |
Auto Route Socket Weld - Configure Auto Route to default to socket weld piping components. For more information, see Auto Route. |
|
AUTOROUTETHRD |
Auto Route Threaded - Configure Auto Route to default to threaded piping components. For more information, see Auto Route. |
|
AUTOWELD |
Auto Weld - Places weld gaps automatically after the last butt weld drawn. For more information, see Auto Weld. |
|
BALE |
Sanitary Ball Valve - Places a sanitary ball valve component in the X-Y plane. For more information, see Sanitary Ball Valve. |
|
BALF |
Ball - Places a ball valve component in the X-Y plane. For more information, see Ball Valve. |
|
BALS/BALT |
Thrd/SW Ball - Places a threaded or socket weld ball valve in the X-Y plane. For more information, see Thrd/SW Ball. |
|
BENT |
Adjustable Bend - Places an adjustable pipe bend. For more information, see Adjustable Bend. |
|
BFYE |
Sanitary Butterfly Valve - Places a sanitary butterfly valve component in the X-Y plane. For more information, see Sanitary Butterfly Valve. |
|
BFYF |
Butterfly - Places a butterfly valve component in the X-Y plane. For more information, see Butterfly Valve. |
|
BLD |
Lined Spacer - Places a lined spacer in the X-Y plane. For more information, see Bleed Ring or Spacer. |
|
BLD |
Bleed Ring - Places a bleed ring in the drawing in the X-Y plane. For more information, see Bleed Ring or Spacer. |
|
BOMCUT |
Cut BOM - Generates a Bill of Material schedule listing each piece of pipe with a length and a tag. For more information, see Cut Bill of Material. |
|
|
BOMDELETE |
Delete BOM - Deletes all entities designated for Bill of Material. For more information, see Delete Bill of Material. |
BOMEXPORT |
Export BOM - Exports the Bill of Material schedule to an external file format that you specify. For more information, see Export Bill of Material. |
|
BOMEXTERNAL |
External BOM - Export a project database to a file based on the columns chosen in the BOMSETUP. For more information, see BOM Setup. |
|
BOMGRID |
BOM Grid - Displays the BOM grid points on the layout only. |
|
BOMIMPORT |
Import BOM - Imports a database into a Bill a Material schedule. For more information, see Import Pipe Bill of Material. |
|
|
BOMSETUP |
BOM Setup - Customizes the Bill of Material schedule to any style or layout that you need. For more information, see BOM Setup. |
BOMSINGLE |
Single BOM - Generates a Bill of Material schedule with each selected object on a line by itself. For more information, see Single Bill of Material. |
|
BOMTOTAL |
Total BOM - Generates a Bill of Material schedule with one tag for a total length of pipe in each size. For more information, see Total Bill of Material. |
|
BREAKPIPE |
Break Pipe - Changes non-segmented piping to segmented piping. For more information, see Break Pipe. |
|
BUSS |
FRP Bush/Insert - Places a bushing in the X-Y plane. For more information, see Threaded/Socket Insert/Bushing. |
|
BUSS/BUST |
Thrd/SW Bush/Insert - Places a threaded/socket bushing in the X-Y plane. For more information, see Thrd/SW Bush/Insert. |
|
C2IN |
System In - Reads a CAESAR II input file. For more information, see System In. |
|
C2PCF |
System Out - Creates a CAESAR II input file. For more information, see System Out. |
|
CADWORXABOUT |
CADWorx About - Opens the About CADWorx Dialog box. |
|
CAL |
Calculator - Opens the MS Windows Calculator Application. |
|
CAPE |
Sanitary Cap - Places a sanitary pipe cap in the X-Y plane. For more information, see Sanitary Cap. |
|
CAPS |
FRP Cap - Places a threaded/socket pipe cap in the X-Y plane. For more information, see Threaded/Socket Cap. |
|
CAPS/CAPT |
Thrd/SW Cap - Places a threaded/socket pipe cap in the X-Y plane. For more information, see Thrd/SW Cap. |
|
CAPW |
Cap - Places a pipe cap in the X-Y plane. For more information, see Cap. |
|
CCRW |
Plan Reducing Cross - Places a four-way reducing cross in the X-Y plane. For more information, see Plan Reducing Cross. |
|
CEDIT |
Local Edit - Modifies the properties of an existing component. For more information, see Local Edit. |
|
CG |
C.G. Generator - Calculates the center of gravity for selected pipe members. For more information, see Weight and Center of Gravity Generator. |
|
CHANGEELEV |
Change - Changes the elevation. For more information, see Change. |
|
CHANGEELEVATION |
Change Elevation - Changes the elevation of a selected pipe in the drawing. For more information, see Change Elevation. |
|
CHANGESIZE |
Change Size - Modifies the size of the components selected. For more information, see Change Size. |
|
CHANGESPEC |
Change Specification - Modifies the specification of the components selected. For more information, see Change Specification. |
|
CHKE |
Sanitary Check Valve - Places a sanitary check valve component in the X-Y plane. For more information, see Sanitary Check Valve. |
|
CHKF |
Check - Places a check valve component in the X-Y plane. For more information, see Check Valve. |
|
CHKS/CHKT |
Thrd/SW Check - Places a threaded or socket weld check valve in the X-Y plane. For more information, see Thrd/SW Check . |
|
CLASHMGMT |
Clash Management - Runs interactive clash detection on 3D solids in the current drawing and any attached XREF drawings. You can also add soft clashes to locations of your model for items that could potentially clash with other parts of the model, or for areas that need to remain clear of obstructions, such as where a level on a valve needs free movement. For more information, see Clash Management. |
|
CNFL |
Lined Concentric - Places a flanged and lined concentric reducer component in the X-Y plane. For more information, see Flanged Concentric Reducer. |
|
CNTF |
Control - Places a control valve component in the X-Y plane. For more information, see Control Valve. |
|
CNTS/CNTT |
Thrd/SW Control - Places a threaded or socket weld control valve in the X-Y plane. For more information, see Thrd/SW Control . |
|
CONVERTCADWORXLEGACYDWGS |
Convert CADWorx Legacy Drawing - Converts the components of a legacy drawing to smart components. For more information, seeCADWorx Legacy Drawing - Match Specifications Dialog Box |
|
CONVERTENHANCED |
Convert Enhanced - Converts the selected components to 3D enhanced mode. For more information, see Convert to 3D enhanced. |
|
CONVERTEXISTING |
Convert Existing - Stops external data (xdata) from appearing in the bill of material or removes xdata from the components. After xdata is prevented or removed, the component is moved to the EXIST layer. For more information, see Convert Existing. |
|
CONVERTFROMPRJDATA |
Convert from Project Data - Converts the selected components to the project data changes made to the specification in the Specification Editor. For more information, see Convert from project data. |
|
CONVERTINTERSECTEDPIPINGS |
Convert Intersected Piping - Converts the intersected piping components based on your selection from the offered list. This usually happens automatically when crossing components. However, if this does not happen, use this command to convert the intersected piping. For more information, see Convert Intersected Piping. |
|
COMP2ALL |
All - Specifies the main size, reduction size, specification, and line number by selecting a component with the needed values. For more information, see All. |
|
COMP2LINE |
Line - Sets the current line number to match that of a component that you select. For more information, see Line (Line Number). |
|
COMP2SIZE |
Size - Sets the main and reduction size by selecting a component. For more information, see Size. |
|
COMP2SIZESPEC |
Size-Spec - Sets the main size, reduction size, and specification by selecting a component. For more information, see Size-Spec. |
|
COMP2SPEC |
Spec - Sets the current specification by selecting a component. For more information, see Spec. |
|
COMPASS |
Compass - Displays a compass-type symbol that indicates the Point and Shoot orientation. For more information, see Compass. |
|
COMPONENTDWGBLOCKEDIT |
Graphics Overlay Editor - Creates graphic overlays of drawings for coupling components. For more information, see Graphics Overlay. |
|
CONC |
Conc Reducer - Places a concentric reducer component in the X-Y plane. For more information, see Conc Reducer. |
|
CONCE |
Sanitary Concentric - Places a sanitary concentric reducer component in the X-Y plane. For more information, see Sanitary Concentric. |
|
CONNECTOG |
Auto Connect - Turns automatic connection on or off. For more information, see Auto Connect. |
|
CONVERTDOUBLE |
2D Double Line - Converts selected components to 2D double line mode. For more information, see Mode Convert and 2D Double Line. |
|
CONVERTISO |
Convert Isometric - Converts selected components to isometric mode. For more information, see Mode Convert and Convert Isometric. |
|
CONVERTSINGLE |
2D Single Line - Converts selected components to 2D single line mode. For more information, see Mode Convert and 2D Single Line. |
|
CONVERTSOLID |
3D Solids - Converts selected components to 3D solid mode. For more information, see Mode Convert and 3D Solids. |
|
CPRS/CPRT |
Thrd/SW Reducing Clpg Plan - Places a threaded/socket reducing coupling in the X-Y plane. For more information, see Thrd/SW Reducing Clpg Plan. |
|
CPS |
FRP Bell Full Clpg Plan - Places a coupling in the X-Y plane. For more information, see Coupling. |
|
CPS/CPT |
Thrd/SW Full Clpg Plan - Places a threaded/socket full coupling in the X-Y plane. For more information, see Thrd/SW Full Clpg Plan. |
|
CREATEGROUPDIC |
Create Group Dictionary - The software checks to see if the Group_Dictionary file is missing or replaced by a solid and corrects the problem if needed. |
|
CRRE |
Lined Reducing Cross Plan - Places a four-way flanged and lined reducing cross in the X-Y plane. For more information, see Cross Reducing Plan. |
|
CRRW |
Plan Reducing Cross - Places a four-way reducing cross in the X-Y plane. For more information, see Plan Reducing Cross. |
|
CRSE |
Lined Cross Plan - Places a four-way flanged and lined cross in the X-Y plane. For more information, see Cross Plan. |
|
CRSS |
FRP Bell Cross Plan - Places a four-way threaded/socket straight cross in the X-Y plane. For more information, see Threaded/Socket Straight Cross Plan. |
|
CRSS/CRST |
Thrd/SW Cross Plan - Places a four-way threaded/socket straight cross in the X-Y plane. For more information, see Thrd/SW Cross Plan. |
|
CRSW |
Plan Cross - Places a four-way straight cross in the X-Y plane. For more information, see Plan Cross. |
|
CURRENT |
Settings - Displays the current drawing settings. For more information, see Settings. |
|
CWADDXD |
Restore XDATA - Restores removed XDATA from a selected specification to a CADWorx component. For more information, see Restore XDATA. |
|
CWADDXDLN |
Restore XDATA to Line Number Data - Restores removed XDATA from a selected specification to CADWorx line number data. For more information, see Restore XDATA. |
|
CWEXPLODE |
CWExplode - Changes the CADWorx component to a CAD 3D solid with xdata included. For more information, see CWexplode . |
|
CWEXPLODEALL |
CWExplodeAll - Changes a CADWorx component to CAD 3D solid without xdata. For more information, see CWExplodeAll. |
|
CWGUIDASSIGN |
GUID Assign - Checks the drawing for duplicate GUIDs. |
|
CWPEDITPIPESLOPE |
Edit Pipe Slope - Displays the Edit Slope dialog box. |
|
CWSHOWNOXD |
Show Removed XDATA - Highlights components where XDATA has been removed. For more information, see Show Removed XDATA. |
|
DBAUDIT |
Audit Pipe Database - Maintains the database for each component in the drawing that has data attached. For more information, see Audit Pipe Database. |
|
DBFGEN |
Export Pipe - Exports CADWorx component information to a Microsoft Access or Microsoft Excel file. For more information, see Export Pipe. |
|
DBFGENXREF |
Database FGEN XREF - Write out a database with XREFS without ID counts to XDATA. |
|
DBFIN |
Import Pipe - Imports and draws CADWorx components from a Microsoft Access or Microsoft Excel file. For more information, see Import Pipe. |
|
DCHF |
Dual Check - Places a dual check valve and flange gasket components in the X-Y plane. For more information, see Dual Check Valve. |
|
DCHS/DCHT |
Thrd/SW Dual Check - Places a threaded or socket weld dual check valve in the X-Y plane. For more information, see Thrd/SW Dual Check . |
|
DELETEDATABASEIDCOUNTS |
Delete Database ID Counts - Delete database information from selected components. |
|
DELETEWELDS |
Delete Weld Gaps - Deletes weld gaps on a component. |
|
DETAILS |
Detail - Opens the Details dialog box in which you can select a detail graphic to place on the drawing. For more information, see Detail. |
|
DIAF |
Diaphragm - Places a diaphragm valve and flange gasket component in the X-Y plane. For more information, see Diaphragm Valve. |
|
DIAS/DIAT |
Thrd/SW Diaphragm - Places a threaded or socket weld diaphragm valve in the X-Y plane. For more information, see Thrd/SW Diaphragm . |
|
DIMADJUST |
Dim Adjustment - Adjusts a dimension when the pipe segments of a particular run have been adjusted or modified with the ISO flag command. For more information, see Dim Adjustment. |
|
DIMCOORD |
Coordinates - Places coordinates in either a user coordinate system or a world coordinate system. For more information, see Coordinates. |
|
DIMH |
Horizontal - Places horizontal dimensions. For more information, see Horizontal. |
|
DIMR |
Rotated - Places rotated dimensions. For more information, see Rotated. |
|
DIMTAILH |
Horizontal with Tail - Places tailed horizontal dimensions on objects from a user-selected reference point. For more information, see Horizontal with Tail. |
|
DIMTAILV |
Vertical with Tail - Places tailed vertical dimensions on objects from a user-selected reference point. For more information, see Vertical with Tail. |
|
DIMV |
Vertical - Places vertical dimensions. For more information, see Vertical. |
|
DISCONTINUITYVIEW |
Discontinuity View - Checks for different types of modeling issues. For more information, see Discontinuity View Palette. |
|
DOTS |
Dots - Opens the Dots dialog box in which you can select a weld dots graphic to place on the drawing. For more information, see Dots. |
|
ECC |
Ecc Reducer - Places an eccentric reducer component in the X-Y plane. For more information, see Ecc Reducer. |
|
ECCE |
Sanitary Eccentric - Places a sanitary eccentric reducer component in the X-Y plane. For more information, see Sanitary Eccentric. |
|
ECFL |
Lined Eccentric - Places a flanged and lined eccentric reducer component in the X-Y plane. For more information, see Lined Eccentric Reducer. |
|
EDITPIPESUPPORTASSEMBLY |
Edit Pipe Support Assembly - Opens the Edit Assembly palette for pipe supports of the selected support in the drawing. |
|
EDITUSERSHAPE |
Edit User Shape - Enables you to redefine geometry points on user shapes. For more information, see Edit by redefining geometry points. |
|
EGAB |
X-Body Gate BW - Places a butt weld X-body style gate valve in the X-Y plane. For more information, see X-Body Gate BW. |
|
EGAS |
X-Body Gate SW - Places a socket weld X-body style gate valve in the X-Y plane. For more information, see X-Body Gate SW. |
|
EGAT |
X-Body Gate Thrd - Places a threaded X-body style gate valve in the X-Y plane. For more information, see X-Body Gate Thrd. |
|
ELBOWCL |
Elbow Centerline - Turns on or off elbow centerlines for use with isometrics. For more information, see Elbow Centerline. |
|
ELEMENT |
Rigid Element - Places a CAESAR II element in the drawing. For more information, see Rigid Element. |
|
ELEV |
Set - Sets the elevation. For more information, see Set. |
|
ELEVATIONS |
Elevation - Opens the Elevations box in which you can select an elevation graphic to place on the drawing. For more information, see Elevation. |
|
ENDFLG |
Flange O.D. - Inserts a graphical representation of a flange O.D. For more information, see Flange O.D. |
|
ENDHIDDEN |
Hidden End - Inserts a graphical representation of the hidden end of a pipe. For more information, see Hidden End. |
|
ENDPIPE |
Pipe End - Inserts a graphical representation of the pipe end of a pipe. For more information, see Pipe End. |
|
ENDPLAIN |
Plain End - Inserts a graphical representation of the plain end of a pipe. For more information, see Plain End. |
|
ENGENERIC |
Nozzle Generic Attach - Attaches nozzle information to any generic CAD object in the drawing. For more information, see Nozzle Generic Attach. |
|
EOLS |
EOL-SW in Plan - Places an elbowlet fitting in the X-Y plane on a plan elbow. For more information, see Elbowlet Socket Weld in Plan. |
|
EOLT |
EOL-Thrd in Plan - Places an elbowlet fitting in the X-Y plane on a plan elbow. For more information, see Elbowlet Thread in Plan. |
|
EOLW |
EOL-Weld in Plan - Places an elbowlet fitting in the X-Y plane on a plan elbow. For more information, see Elbowlet Weld in Plan. |
|
EXPF |
Expansion Joint - Places an expansion joint in the drawing in the X-Y plane. For more information, see Expansion Joint. |
|
FITTINGWIDTH |
Fitting Width - Controls the appearance of all flanged, socket weld, and threaded fittings. For more information, see Fitting Width. |
|
FLGB |
Blind - Places a blind flange in the X-Y plane. For more information, see Blind Flange. |
|
FLGL |
Lap Joint - Places a lapped-joint flange in the X-Y plane. For more information, see Lap Joint Flange. |
|
FLGO |
Slip On - Places a slip-on flange in the X-Y plane. For more information, see Slip-on Flange. |
|
FLGS |
Socket Weld - Places a socket type flange in the X-Y plane. For more information, see Socket Type Flange. |
|
FLGT |
Threaded - Places a threaded flange in the X-Y plane. For more information, see Threaded Flange. |
|
FLGW |
Weld Neck - Places a weld neck flange in the X-Y plane. For more information, see Weld Neck Flange. |
|
FLRO |
Reducing Slip On - Places a reducing slip on flange in the X-Y plane. For more information, see Reducing Slip-on Flange. |
|
FLRT |
Reducing Threaded - Places a reducing threaded flange in the X-Y plane. For more information, see Reducing Threaded Flange. |
|
FLRW |
Reducing Weld Neck - Places a reducing weld neck flange in the X-Y plane. For more information, see Reducing Weld Neck Flange. |
|
GAGS/GAGT |
Thrd/SW Gage - Places a threaded or socket weld gage valve in the X-Y plane. For more information, see Thrd/SW Gage . |
|
GAS |
Gasket - Places a gasket. For more information, see Gasket. |
|
GATE |
Sanitary Gate Valve - Places a sanitary gate valve component in the X-Y plane. For more information, see Sanitary Gate Valve. |
|
GATF |
Gate - Places a gate valve component in the X-Y plane. For more information, see Gate Valve. |
|
GATS/GATT |
Thrd/SW Gate - Places a threaded or socket weld gate valve in the X-Y plane. For more information, see Thrd/SW Gate. |
|
GCEDIT |
Global Edit - Modifies the properties of multiple components. For more information, see Global Edit. |
|
GENERIC |
Generic Attach - Attaches information to any generic CAD object in the drawing. For more information, see Generic Attach. |
|
GLBE |
Sanitary Globe Valve - Places a sanitary globe valve component in the X-Y plane. For more information, see Sanitary Globe Valve. |
|
GLBF |
Globe - Places a globe valve component in the X-Y plane. For more information, see Globe Valve. |
|
GLBS/GLBT |
Thrd/SW Globe - Places a threaded or socket weld globe valve in the X-Y plane. For more information, see Thrd/SW Globe . |
|
GNEDIT |
Generic Nozzle Edit - Edit a generic nozzle component. |
|
GROUPTOG |
Group On/Off - Turns on or off the grouping of the centerline of the component with the accompanying graphics. For more information, see Group On/Off. |
|
GUIDE |
Guide - Creates a guide-type restraint. For more information, see Guide. |
|
H11EN |
Sanitary 11.25 Ell Side - Places an 11.25 degree sanitary elbow normal to the X-Y plane when the previous or next run is horizontal to the X-Y plane. For more information, see Sanitary 11.25 Ell Side. |
|
H11LR |
Side 11.25 Ell - Places an 11.25 degree elbow normal to the X-Y plane. For more information, see Side 11.25 Ell. |
|
H18LR |
Side 180 LR Return - Places a 180 degree long radius return normal to the X-Y plane with the return ends on the X-Y plane. For more information, see Side 180 LR Return. |
|
H18SR |
Side 180 SR Return - Places a 180 degree short radius return normal to the X-Y plane with the return ends on the X-Y plane. For more information, see Side 180 SR Return. |
|
H22EN |
Sanitary 22.5 Ell Side - Places a 22.5 degree sanitary elbow normal to the X-Y plane when the previous or next run is horizontal to the X-Y plane. For more information, see Sanitary 22.5 Ell Side. |
|
H22LR |
Side 22.5 Ell - Places a 22.5 degree elbow normal to the X-Y plane. For more information, see Side 22.5 Ell. |
|
H3VE |
Sanitary 3-Way Valve Side - Places a 3-way valve component with the branch normal to the X-Y plane. For more information, see Sanitary 3-Way Valve Side. |
|
H3VF |
3 Way Side - Places a three-way valve component with the valve branch normal to the X-Y plane. For more information, see 3-Way Side Valve. |
|
H3VS/H3VT |
Thrd/SW 3 Way Side - Places a threaded or socket weld three-way valve with the valve branch normal to the X-Y plane. For more information, see Thrd/SW 3 Way Side. |
|
H45EN |
Sanitary 45 Ell Side - Places a 45 degree sanitary elbow normal to the X-Y plane. For more information, see Sanitary 45 Ell Side. |
|
H45FL |
Lined 45 Ell Side - Places a 45 degree flanged and lined elbow normal to the X-Y plane. For more information, see Flanged 45 Degree Elbow Side. |
|
H45LR |
Side 45 Ell - Places a 45 degree elbow normal to the X-Y plane when the previous or next run is horizontal to the X-Y plane. For more information, see Side 45 Ell. |
|
H45S |
FRP Bell 45 Ell Side - Places a 45 degree threaded/socket elbow normal to the X-Y plane. For more information, see Threaded/Socket 45 Degree Elbow Side. |
|
H45S/H45T |
Thrd/SW 45 Ell Side - Places a 45 degree threaded/socket elbow normal to the X-Y plane. For more information, see Thrd/SW 45 Ell Side. |
|
H4VF |
4 Way Side - Places a four-way valve component with the valve branches normal to the X-Y plane. For. more information, see 4-Way Side Valve. |
|
H4VS/H4VT |
Thrd/SW 4 Way Side - Places a threaded or socket weld four-way valve with the valve branches normal to the X-Y plane. For more information, see Thrd/SW 4 Way Side. |
|
H90EN |
Sanitary 90 Elbow - Places a 90 degree sanitary elbow normal to the X-Y plane. |
|
H90FL |
Lined 90 Ell Side - Places a 90 degree flanged and lined elbow normal to the X-Y plane. For more information, see Flanged 90 Degree Elbow Side. |
|
H90LR |
Side 90 LR Ell - Places a 90 degree long radius elbow normal to the X-Y plane. For more information, see Side 90 LR Ell. |
|
H90RD |
Side 90 Reducing Ell - Places a 90 degree reducing elbow normal to the X-Y plane. For more information, see Side 90 Reducing Ell. |
|
H90RE |
Sanitary 90 Reducing Ell Side - Places a 90 degree reducing elbow normal to the X-Y plane. For more information, see Sanitary 90 Reducing Ell Side. |
|
H90RS/H90RT |
Thrd/SW 90 Red Ell Side - Places a 90 degree threaded/socket reducing elbow normal to the X-Y plane. For more information, see Thrd/SW 90 Red Ell Side. |
|
H90S |
FRP Bell 90 Ell Side - Places a 90 degree threaded/socket elbow normal to the X-Y plane. For more information, see Side Threaded/Socket 90 Degree Elbow. |
|
H90S/H90T |
Thrd/SW 90 Ell Side - Places a 90 degree threaded/socket elbow normal to the X-Y plane. For more information, see Thrd/SW 90 Ell Side. |
|
H90SR |
Side 90 SR Ell - Places a 90 degree short radius elbow normal to the X-Y plane. For more information, see Side 90 SR Ell. |
|
H90SS/H90ST |
Thrd/SW 90 Street Ell Side - Places a 90 degree threaded/socket street elbow normal to the X-Y plane. For more information, see Thrd/SW 90 Street Ell Side. |
|
HANGE |
Sanitary Angle Valve Side - Places a 90 degree sanitary angle valve component with the branch normal to the X-Y plane. For more information, see Sanitary Angle Valve Side. |
|
HANGF |
Angle Side - Places a 90 degree angle valve in the X-Y plane. For more information, see Angle Side Valve. |
|
HANGS/HANGT |
Thrd/SW Angle Side - Places a threaded or socket weld angle valve in the X-Y plane. For more information, see Thrd/SW Angle Side. |
|
HCATEDIT |
HVAC Catalog Editor - Opens the HVAC catalog editor dialog. |
|
HCCRW |
Side Reducing Cross - Places a four-way reducing cross with the reducing branch normal to the X-Y plane. For more information, see Side Reducing Cross. |
|
HCEDIT |
HVAC Component Edit - Edit an HVAC component. For more information, see Edit. |
|
HCPS/HCPT |
Thrd/SW Half Clpg Plan - Places a threaded/socket half coupling in the X-Y plane. For more information, see Thrd/SW Half Clpg Plan. |
|
HCRRE |
Lined Reducing Cross Side - Places a four-way flanged and lined reducing cross with the reducing branch normal to the X-Y plane. For more information, see Cross Reducing Side. |
|
HCRRE |
Sanitary Reducing Cross Side - Places a four-way sanitary reducing cross with the reducing branch normal to the X-Y plane. For more information, see Cross Reducing Side. |
|
HCRRW |
Side Reducing Cross - Places a four-way reducing cross with the reducing branch normal to the X-Y plane. For more information, see Side Reducing Cross. |
|
HCRSE |
Lined Cross Side - Places a four-way flanged and lined cross with the branches normal to the X-Y plane. For more information, see Cross Side. |
|
HCRSS |
FRP Bell Cross Side - Places a four-way straight threaded/socket cross with the branch normal to the X-Y plane. For more information, see Threaded/Socket Straight Cross Side. |
|
HCRSW |
Side Cross - Places a four-way straight cross with the branch normal to the X-Y plane. For more information, see Side Cross. |
|
HDATAREMOVE |
Data Remove - Removes CADWorx data from components. For more information, see Data Remove. |
|
HDBAUDIT |
Audit HVAC Database - Maintains the database for each component in the drawing that has data attached. For more information, see Audit HVAC Database. |
|
HDBFGEN |
DB Generate - Exports CADWorx HVAC information to a Microsoft Access or Microsoft Excel file. For more information, see DB Generate. |
|
HDBFIN |
DB In - Imports and draws CADWorx HVAC components from a Microsoft Access or Microsoft Excel file. For more information, see DB In. |
|
HEOLS |
EOL-SW in Side - Places an elbowlet fitting with in the X-Y plane on a side elbow. For more information, see Elbowlet Socket Weld in Side. |
|
HEOLT |
EOL-Thrd in Side - Places an elbowlet fitting with in the X-Y plane on a side elbow. For more information, see Elbowlet Thread in Side. |
|
HEOLW |
EOL-Weld in Side - Places an elbowlet fitting with in the X-Y plane on a side elbow. For more information, see Elbowlet Weld in Side. |
|
HGCEDIT |
GC Edit - Edits global HVAC component data. For more information, see GC Edit. |
|
HGENERIC |
Generic Attach - Attaches information to any generic CAD object in the drawing. For more information, see Generic Attach. |
|
HGENERICD |
Generic Attach - Opens the Generic Attach (Create) dialog box. |
|
HIDEINSULATION |
Hide Insulation - Hides insulation on the selected components when they contain insulation. |
|
HLARE |
Sanitary Lateral Reducing Side - Places a 45 degree sanitary reducing lateral in the X-Y plane with the branch in the X-Z or Y-Z plane. For more information, see Sanitary Lateral Reducing Side. |
|
HLATE |
Lined Lateral Side - Places a 45 degree flanged and lined lateral in the X-Y plane with the branch in the X-Z or Y-Z plane. For more information, see Lateral Side. |
|
HLATS |
FRP Bell Lateral Side - Places a 45 degree threaded/socket lateral in the X-Y plane with the branch in the X-Z or Y-Z plane. For more information, see Threaded/Socket Lateral Side. |
|
HLATS/HLATT |
Thrd/SW Lateral Side - Places a 45 degree threaded/socket lateral in the X-Y plane with the branch in the X-Z or Y-Z plane. For more information, see Thrd/SW Lateral Side. |
|
HLATW |
Side Lateral - Places a 45 degree lateral tee in the X-Y plane with the branch in the X-Z or Y-Z plane. For more information, see Side Lateral. |
|
HLAYERCHANGE |
Layer Change - Changes the solid and centerline layers associated with components. For more information, see Layer Change. |
|
HLOLS |
LOL- SW in Side - Places a lateral fitting 45 degrees out of the X-Y plane. For more information, see Latrolet Socket Weld in Side. |
|
HLOLT |
LOL-Thrd in Side - Places a lateral fitting 45 degrees out of the X-Y plane. For more information, see Latrolet Thread in Side. |
|
HLOLW |
LOL-Weld in Side - Places a lateral fitting 45 degrees out of the X-Y plane. For more information, see Latrolet Weld in Side. |
|
HNOLP |
Plain End Nip-o-let - Places a nip-o-let with plain ends in the X-Y plane. |
|
HNOLT |
Threaded end Nip-o-let - Places a nip-o-let with threaded ends in the X-Y plane. |
|
HRCSS/HCRST |
Thrd/SW Cross Side - Places a four-way straight threaded/socket cross with the branch normal to the X-Y plane. For more information, see Thrd/SW Cross Side. |
|
HRELF |
Relief Top - Places a 90 degree pressure relief valve with the relief end normal to the X-Y plane. For more information, see Relief Top Valve. |
|
HRELS/HRELT |
Thrd/SW Relief Side - Places a threaded or socket weld 90 degree relief valve in the X-Y plane. For more information, see Thrd/SW Relief Side. |
|
HSTRF |
Flanged Side - Places a flanged pipe component normal to the X-Y plane. For more information, see Flanged Side. |
|
HSTRS |
Horizontal Socket Strainer - Places a horizontal socket strainer component normal to the X-Y plane. |
|
HSTRT |
SW/Thrd Side - Places a socket weld/ threaded strainer component normal to the X-Y plane. For more information, see SW/Thrd Side. |
|
HSYNC |
Synchronize HVAC Database - Checks all components in the drawing and updates them according to the current value in the database. For more information, see Synchronize HVAC Database. |
|
HTEFL |
Lined Tee Side - Places a flanged and lined tee with the branch normal to the X-Y plane. For more information, see Flanged Tee Side. |
|
HTERE |
Lined Reducing Tee Side - Places a flanged and lined reducing tee with the branch normal to the X-Y plane. For more information, see Reducing Tee Side. |
|
HTERS/HTERT |
Thrd/SW Tee Red Side - Places a straight threaded/socket reducing tee with the branch normal to the X-Y plane. For more information, see Thrd/SW Tee Red Side. |
|
HTERW |
Side Reducing Tee - Places a straight reducing tee with the branch normal to the X-Y plane. For more information, see Side Reducing Tee. |
|
HTESE |
Sanitary Tee Side - Places a straight sanitary tee with the branch normal to the X-Y plane. For more information, see Sanitary Tee Side. |
|
HTESS |
FRP Bell Tee Side - Places a straight threaded/socket tee with the branch normal to the X-Y plane. For more information, see Threaded/Socket Straight Tee Side. |
|
HTESS/HTEST |
Thrd/SW Tee Side - Places a threaded/socket straight tee normal to the X-Y plane. For more information, see Thrd/SW Tee Side. |
|
HTESW |
Side Tee - Places a straight tee with the branch normal to the X-Y plane. For more information, see Side Tee. |
|
HUBEN |
Sanitary U-Bend Side - Places a 180 degree u-bend normal to the X-Y plane with the return ends on the X-Y plane. For more information, see Sanitary U-Bend Side. |
|
HUSER |
User Shape - Places a component using a custom user shape. For more information, see User Shape. |
|
HVAC |
HVAC Shapes - Places HVAC and cable tray shapes in the drawing. For more information, see HVAC. |
|
HVACC |
HVAC Shapes Catalog - Places HVAC shapes and cable tray shapes that are defined in a data file library. For more information, see HVAC Shapes Catalog. |
|
HVCR |
HVAC Square Cross Radius - Opens the DRAW HVAC/Cable Tray Shape dialog box with SQUARE CROSS RADIUS selected. |
|
HVET |
HVAC Square Eccentric Transition - Opens the DRAW HVAC/Cable Tray Shape dialog box with SQUARE ECCENTRIC TRANSITION selected. |
|
HVFT |
HVAC Square Flat Radius Tee - Opens the DRAW HVAC/Cable Tray Shape dialog box with SQUARE FLAT RADIUS TEE selected. |
|
HVOM |
HVAC Oval Mitered - Opens the DRAW HVAC/Cable Tray Shape dialog box with OVAL MITERED selected. |
|
HVOO |
HVAC Oval Oval Transition - Opens the DRAW HVAC/Cable Tray Shape dialog box with OVAL OVAL TRANSITION selected. |
|
HVOS |
HVAC Oval Straight - Opens the DRAW HVAC/Cable Tray Shape dialog box with OVAL STRAIGHT selected. |
|
HVOT |
HVAC Square Oval Transition - Opens the DRAW HVAC/Cable Tray Shape dialog box with SQUARE OVAL TRANSITION selected. |
|
HVRT |
HVAC Radius Tee - Opens the DRAW HVAC/Cable Tray Shape dialog box with RADIUS TEE selected. |
|
HVSB |
HVAC Square Bend - Opens the DRAW HVAC/Cable Tray Shape dialog box with SQUARE BEND selected. |
|
HVSC |
HVAC Square Cross - Opens the DRAW HVAC/Cable Tray Shape dialog box with SQUARE CROSS selected. |
|
HVSE |
HVAC Square Eccentric Radius - Opens the DRAW HVAC/Cable Tray Shape dialog box with SQUARE ECCENTRIC RADIUS selected. |
|
HVSM |
HVAC Square Mitered - Opens the DRAW HVAC/Cable Tray Shape dialog box with SQUARE MITERED selected. |
|
HVSP |
HVAC Square Pants - Opens the DRAW HVAC/Cable Tray Shape dialog box with SQUARE PANTS selected. |
|
HVSR |
HVAC Square Radius - Opens the DRAW HVAC/Cable Tray Shape dialog box with SQUARE RADIUS selected. |
|
HVSS |
HVAC Square Straight - Opens the DRAW HVAC/Cable Tray Shape dialog box with SQUARE STRAIGHT selected. |
|
HVST |
HVAC Square Square Transition - Opens the DRAW HVAC/Cable Tray Shape dialog box with SQUARE SQUARE TRANSITION selected. |
|
HVTE |
HVAC Square Tee - Opens the DRAW HVAC/Cable Tray Shape dialog box with SQUARE TEE selected. |
|
HVVB |
HVAC Vertical Square Bend - Opens the DRAW HVAC/Cable Tray Shape dialog box with VERTICAL SQUARE BEND selected. |
|
HVVM |
HVAC Vertical Square Mitered - Opens the DRAW HVAC/Cable Tray Shape dialog box with VERTICAL SQUARE MITERED selected. |
|
HVVR |
HVAC Vertical Square Radius - Opens the DRAW HVAC/Cable Tray Shape dialog box with VERTICAL SQUARE RADIUS selected. |
|
HWGTUPDATE |
HVAC Weight Update - Modify the weight of an HVAC component. |
|
HYB |
Side Wye - Places a wye on the X-Y plane with the branches normal to the X-Y plane. For more information, see Side Wye. |
|
HYE |
Sanitary Wye Side - Places a sanitary wye on the X-Y plane with the branches normal to the X-Y plane. For more information, see Sanitary Wye Side. |
|
HYFL |
Lined Wye Side - Places a flanged and lined wye on the X-Y plane with the branches normal to the X-Y plane. For more information, see Lined Wye Side. |
|
ICEDIT |
Isogen Component Edit - Modify an ISOGEN component. |
|
INSERTASSEMBLY |
Insert Assembly - Inserts the selected assembly into the model. For more information, see Assembly View. |
|
INSERTINTODBBATCH |
Database Batch Mode - Toggles batch mode on/off. |
|
INSERTSPECVIEWITEM |
Insert Spec View Item - Inserts the last selected item from Spec View. |
|
INSERTSUPPORT |
Insert Support - Insert the last selected pipe support or the start procedure of the last selected component. For more information, see Pipe Support Modeler. |
|
INSTRUMENTS |
Instrument - Opens the Instruments dialog box in which you can select an instrument graphic to place on the drawing. For more information, see Instrument. |
|
INSULATIONDELETE |
Insulation Delete - Delete insulation data and objects from the drawing. |
|
INSULATIONREFEDITFIX |
Insulation Reference Edit Fix - Edit an insulation reference. |
|
INSULATIONVIEW |
Insulation View - Creates a data file in which you can add, modify, and remove insulation configurations that can be applied to CADWorx components. For more information, see Insulation View Palette. |
|
INSULATIONVIEWCLOSE |
Insulation View Close - Close the Insulation View dialog box. |
|
ISOFLAG |
ISO Flag - Sets a flag in the component indicating that the present stored length should be used regardless of what type of length modifications are made to the pipe component. For more information, see ISO Flag. |
|
ISOGENBATCH |
Isogen Batch - Generates isometrics using Isogen for one or more line numbers. For more information, see Isogen Batch. |
|
-ISOGENBATCH |
Isogen Batch (silent) - Generates isometrics using Isogen for one or more line numbers. For more information, see Using -ISOGENBATCH. |
|
ISOGENIN |
Isogen In - Import an isometric drawing. |
|
ISOGENOUT |
Isogen Out - Generates an isometric drawing. For more information, see Isogen Out. |
|
-ISOGENOUT |
Isogen Out Silent - Runs the Isogenout command without dialog boxes. |
|
ISOGENPROJECTDATASETUP |
Isogen Project Data Setup - Opens the Isogen Project Data Setup dialog box. |
|
ISOGENRESET |
Isogen Reset - Removes Isogen info from components. |
|
ISOGENSETTINGS |
Isogen Settings - Opens the Isogen Settings dialog box. |
|
ISOGENSTARTPT |
Isogen Start Point - Places Isogen start point symbols in the drawing. For more information, see Isogen Start Point. |
|
ISOGENSUPL |
Isogen Supplemental - Places supplemental Isogen blocks in the drawing. For more information, see Isogen Supplemental. |
|
ISOS |
ISO - Opens the Isometric Symbols dialog box in which you can select an ISO symbol graphic to place on the drawing. For more information, see ISO, ISO. |
|
JOINPIPE |
Join Pipe - Changes segmented piping to non-segmented piping. For more information, see Join Pipe. |
|
LARE |
Sanitary Lateral Reducing Plan - Places a 45 degree sanitary reducing lateral in the X-Y plane. For more information, see Sanitary Lateral Reducing Plan. |
|
LATE |
Lined Lateral Plan - Places a 45 degree flanged and lined lateral in the X-Y plane. For more information, see Lateral Plan. |
|
LATS |
FRP Bell Lateral Plan - Places a 45 degree threaded/socket lateral in the X-Y plane. For more information, see Threaded/Socket Lateral Plan. |
|
LATS/LATT |
Thrd/SW Lateral Plan - Places a 45 degree threaded/socket lateral in the X-Y plane. For more information, see Thrd/SW Lateral Plan. |
|
LATW |
Plan Lateral - Places a 45 degree lateral tee in the X-Y plane. For more information, see Plan Lateral. |
|
LAUNCHICONFIGURE |
Launch I-Configure - Launches I-Configure. |
|
LAUNCHSYMBOLEDITOR |
Launch Symbol Editor - Launch the Symbol Editor. |
|
LAYERCHANGE |
Change Layer - Changes an object’s layer to the layer associated with another object that you select. For more information, see Change Layer. |
|
LAYERDELETE |
Delete Layer - Removes all of the entities on the layer associated with an entity that you select. For more information, see Delete Layer. |
|
LAYERISOLATE |
Isolate Layer - Turns off all layers except for the layer associated with an entity that you select. For more information, see Isolate Layer. |
|
LAYEROFF |
Layer Off - Turns off the layer associated with an entity that you select. For more information, see Layer Off. |
|
LAYERON |
On - Turns a layer back on that was turned off with the Layer Off command. For more information, see Layer On. |
|
LAYERRESTORE |
Previous - Sets the current layer back to the previous layer when you have placed dimensioning or text. For more information, see Previous. |
|
LAYERSET |
Set Layer - Sets the current layer to that of an object that you select. For more information, see Set Layer. |
|
LAYERUNISO |
Un-isolate Layer - Turns all of the layers back on that were turned off with the Isolate Layer command. For more information, see Un-Isolate Layer. |
|
LINEISOLATE |
Line Isolate - Isolates components based on their line numbers or their specifications. For more information, see Line Isolate. |
|
LINEVIEW |
Line View - Isolates components based on their line number or their specification. For more information, see Line View. |
|
LINEVIEWCLOSE |
Line View Close - Close the Line View dialog box |
|
LINEWIDTH |
Single Line Width - Specifies the line width for single-line components. For more information, see Single Line Width. |
|
LIVEDB |
Setup Live Database - Links the drawing to an external database. For more information, see Setup Live Database. |
|
LOADLANGPLANT |
Load Language - Load the language file defined in Setup. |
|
LOADMENUPLANT |
Load Menu and Language - Load the language file defined in Setup and reload the menu. |
|
LOLS |
LOL- SW in Plan - Places a lateral 45 degree fitting in the X-Y plane. For more information, see Latrolet Socket Weld in Plan. |
|
LOLT |
LOL-Thrd in Plan - Places a lateral 45 degree fitting in the X-Y plane. For more information, see Latrolet Thread in Plan. |
|
LOLW |
LOL-Weld in Plan - Places a lateral 45 degree fitting in the X-Y plane. For more information, see Latrolet Weld in Plan. |
|
LWN |
Long Weld Neck - Places a long weld neck component in the X-Y plane. For more information, see Long Weld Neck. |
|
MAIN |
Set Main Size - Set the Main size. For more information, see CADWorx Plant Setup Dialog Box. |
|
MAKEASSEMBLY |
Make Assembly - Creates a new assembly. For more information, see Assembly View. |
|
MATCH |
Match Layer - Changes an object’s properties to match those of another object that you select. For more information, see Match Layer. |
|
MBENT |
Miter bent pipe - Insert a mitered bend in the pipe. |
|
MISC |
Misc - Opens the Miscellaneous dialog box in which you can select a miscellaneous symbol graphic to place on the drawing. For more information, see Misc. |
|
MODIFYINSULATION |
Modify Insulation - Modifies existing insulation graphics and data. For more information, see Apply Tab (CADWorx Insulation View Palette). |
|
MOVECOMPONENT |
Move Component - Allows you to move a component. For more information, see Continue Routing. |
|
MOVELINE |
Move Line - Enables you to move, lengthen, or change the elevation of piping. For more information, see Moveline. |
|
MPIP |
Miters - Places a mitered pipe component in the X-Y plane. For more information, see Miters. |
|
NEDS/NEDT |
Thrd/SW Needle - Places a threaded or socket weld needle valve in the X-Y plane. For more information, see Thrd/SW Needle . |
|
NEWPIPESUPPORTASSEMBLY |
New Pipe Support Assembly - Create a new pipe support assembly. For more information, see Pipe Support Modeler |
|
NIP |
Nipple - Places a pipe nipple in the X-Y plane. For more information, see Nipple. |
|
NOLP |
Weld in Plan - Places a nipolet fitting in the X-Y plane. The branch end of the fitting is plain. For more information, see Nipolet Weld in Plan. |
|
NOLT |
Thrd in Plan - Places a nipolet fitting in the X-Y plane. The branch end of the fitting is threaded. For more information, see Nipolet Thread in Plan. |
|
NONSTDBOLT |
Non Standard - Places nonstandard stud bolts at the selected location. For more information, see Non Standard. |
|
NUMBER- |
Decrement - Decreases the line number count value. For more information, see Decrement (Line Number). |
|
NUMBER+ |
Increment - Increases the line number count value. For more information, see Increment (Line Number). |
|
NUMBERANNOTATE |
Annotate - Labels components with existing line numbers. For more information, see Annotate (Line Number). |
|
NUMBERASSIGN |
Assign - Assigns new or different line numbers to existing components. For more information, see Assign (Line Number). |
|
NUMBERCOUNT |
Count - Sets the present line number count value. For more information, see Count (Line Number). |
|
NUMBERPID |
Number P&ID - Load the size and spec from the P&ID config file. |
|
NUMBERSET |
Set - Sets line number from three different sources: a P&ID project, the current drawing, or a component that you select. For more information, see Set (Line Number). |
|
NUMBERSETUP |
Setup - Modifies line number configurations. For more information, see Setup (Line Number). |
|
NUTE |
Sanitary Nut/Coupling - Places a sanitary nut/coupling in the X-Y plane. For more information, see Sanitary Nut/Coupling. |
|
ORTHOGENLAUNCH |
OrthoGen Launch - Launches the OrthoGen application. For more information, see OrthoGen Launch |
|
ORTHOGENOUT |
OrthoGen Out - Generates OrthoGen drawings from a script file created using the OrthoGen application. For more information, see OrthoGen Out. |
|
OTAP |
Offset Tap - Creates offset tap connections for use by Isogen. For more information, see Offset Tap. |
|
PCFIN |
PCF In - Imports components into the current drawing from a piping component (PCF) file. For more information, see PCF In. |
|
PCFOUT |
PCF Out - Creates a piping component (PCF) file from components selected in the drawing. For more information, see PCF Out. |
|
-PCFOUT |
PCFout Silent - Runs the PCFout command without dialog boxes. |
|
PIDVIEW |
P&ID View - Links data between the Plant and P&ID table in a project database. For more information, see P&ID View. |
|
PIPESUPPORTVIEW |
Pipe Support Modeler - Inserts pipe and elbow support components. For more information, see Pipe Support Modeler. |
|
PIPESUPPORTVIEWCLOSE |
Close Pipe Support View - Close the Pipe Support View dialog box |
|
PIPF |
Pipe - Places a fiberglass pipe component. For more information, see Fiberglass Pipe. |
|
PIPF |
Thrd/SW Pipe - Places a threaded/socket pipe component. For more information, see Thrd/SW Pipe. |
|
PIPF1 |
Start the pipe router using socket weld or threaded pipe. |
|
PIPFL |
Lined Pipe - Places a flanged and lined pipe component in the X-Y plane. For more information, see Lined Pipe. |
|
PIPFL1 |
Start the pipe router using flanged and lined pipe. |
|
PIPW |
Pipe - Places a butt-welded pipe component. For more information, see Pipe. |
|
PIPW1 |
Start the pipe router using buttweld pipe. |
|
PLACEBOLT |
Place Bolts - Inserts stud bolt sets into the drawing environment for Bill of Materials extraction. For more information, see Standard. |
|
PLANS |
Plan - Opens the Plan dialog box in which you can select a plan graphic to place on the drawing. For more information, see Plan. |
|
PLGT |
Thrd/SW Plug - Places a threaded/socket plug in the X-Y plane. For more information, see Thrd/SW Plug. |
|
PLUE |
Sanitary Plug Valve - Places a sanitary plug valve component in the X-Y plane. For more information, see Sanitary Plug Valve. |
|
PLUF |
Plug - Places a plug valve component in the X-Y plane. For more information, see Plug Valve. |
|
PLUS/PLUT |
Thrd/SW Plug - Places a threaded or socket weld plug valve in the X-Y plane. For more information, see Thrd/SW Plug . |
|
R45LR |
45 LR Ell - Places a 45 degree elbow with the end rolled at a 45 degree angle from the X-Y plane. For more information, see 45 LR Ell. |
|
R90LR |
90 LR Ell - Places a 90 degree long radius elbow with the end rolled at a 45 degree angle from the X-Y plane. For more information, see 90 LR Ell. |
|
R90SR |
90 SR Ell - Places a 90 degree short radius elbow with the end rolled at a 45 degree angle from the X-Y plane. For more information, see 90 SR Ell. |
|
-- |
REASSOCIATEMODEL |
Re-associate the Components - Enables you to re-associate disconnected components. For more information, see Re-associate the Components. |
RED |
Set Reduced Size - Set the Reduced size. For more information, see CADWorx Plant Setup Dialog Box. |
|
REGENERATEPIPESUPPORT |
Regenerate Pipe Support - Regenerates the pipe support from the updated data when the data of a pipe support already contained in the drawing changes. For more information, see Edit Pipe Support Features. |
|
REINFPAD |
Reinforcing Pad - Inserts intelligent information indicating a reinforcement pad. For more information, see Reinforcing Pad. |
|
REINFSAD |
Reinforcing Saddle - Inserts intelligent information indicating a reinforcement saddle. For more information, see Reinforcing Saddle. |
|
RELOADPROJECTFILE |
Reload Project File - Reloads the project (.prj) selected for any changes made in the Specification Editor. For more information, see Set Specification and Size. |
|
RELF |
Relief Side - Places a 90 degree pressure relief valve in the X-Y plane. For more information, see Relief Side Valve. |
|
RELS/RELT |
Thrd/SW Relief Top - Places a threaded or socket weld 90 degree pressure relief valve with the relief end normal to the X-Y plane. For more information, see Thrd/SW Relief Top. |
|
REMOVEGRAPHICS |
Remove Graphics - Removes the graphics from the selected components. The insulation data remains. For more information, see Apply Tab (CADWorx Insulation View Palette). |
|
REMOVEINSULATION |
Remove Insulation - Removes existing insulations graphics and data. For more information, see Apply Tab (CADWorx Insulation View Palette). |
|
REPLACECOMPS |
Replace Components - Replace selected components in the drawing. For more information, see Replace a component in the model. |
|
REPLACEPIPESUPPORT |
Replace Pipe Support - Replace a pipe support. For more information, see Pipe Support Modeler. |
|
REPORTINSULATION |
Report Insulation - Creates a complete report, in HTML format, about all of the insulation components in the model. The report is itemized by the different types of insulation data and calculates the total weight, volume, and length. For more information, see Apply Tab (CADWorx Insulation View Palette). |
|
REVIEWLEGACYCOMPONENTS |
Review Legacy Components - Search the drawing for legacy components and display the information based on the Search Options. For more information, see Find Legacy Components Dialog Box. |
|
ROTATIONAL |
Rotational - Creates a rotational-type restraint. For more information, see Rotational. |
|
ROTF |
Rotary - Places a rotary valve component in the X-Y plane. For more information, see Rotary Valve. |
|
ROTS/ROTT |
Thrd/SW Rotary - Places a threaded or socket weld rotary valve in the X-Y plane. For more information, see Thrd/SW Rotary . |
|
ROUTEBWLR |
Buttweld LR - Attaches elbows and piping to a selected routing line. For more information, see Buttweld LR. |
|
ROUTEBWSE |
Buttweld SR - Attaches elbows and piping to a selected routing line. For more information, see Buttweld SR. |
|
ROUTEBWSR |
Buttweld SR - Start the pipe router using buttwelded short radius pipe. For more information, see Buttweld SR. |
|
ROUTER |
Router - Provides routing lines with various options such as slope and elevation changes. For more information, see Router. |
|
ROUTESW |
Socket Weld - Attaches elbows and piping to a selected routing line. For more information, see Socket Weld. |
|
ROUTETRHD |
Threaded - Attaches elbows and piping to a selected routing line. For more information, see Threaded. |
|
RTESW |
Tee - Places a tee with the branch rolled at a 45 degree angle from the X-Y plane. For more information, see Tee. |
|
SECTIONS |
Section - Opens the Sections dialog box in which you can select a section graphic to place on the drawing. For more information, see Section. |
|
SETBOPTOPROUTINGSETTING |
Set Pipe Routing Settings - Sets the pipe routing mode to Center, BOP, TOP, Left, or Right. Running this command allows you to select one of these options. |
|
SETOTAPSKEY |
Set OTAP SKEY - Sets an SKEY for the selected OTAP. For more information, see Set an OTAP SKEY. |
|
, |
SETSIZE, SETSPEC |
Main Size - Specifies the specification, and the main and reduction sizes. For more information, see Set Specification and Size. |
SETUP |
Setup - Defines all CADWorx settings within the current drawings. For more information, see Setup. |
|
SETUPC |
Plant Setup Configuration View - Opens the CADWorx Plant Setup current configuration dialog box. |
|
SETUPPLANTCFG |
Setup Plant Configuration - Opens the Select a Configuration to Use dialog box. |
|
SNUBBER |
Snubber - Creates a snubber-type restraint. For more information, see Snubber. |
|
SOL |
Sock-O-Let - Places a sock-o-let in the X-Y plane. For more information, see Sock-O-Let. |
|
SOL |
SW in Plan - Places a sockolet fitting in the X-Y plane. For more information, see Sockolet Socket Weld in Plan. |
|
SMODE |
Socket Mode - Model in socket weld mode. |
|
SPCT |
Spec Bld Side - Places a blind spectacle in the drawing normal to the X-Y plane. For more information, see Spectacle Blind Side. |
|
SPEC |
Set Spec - Set the Spec. For more information, see CADWorx Plant Setup Dialog Box. |
|
SPECCHGTOGGLE |
Spec Change Toggle - Turns the TAG value update on or off. |
|
SPECEDIT |
Editor - Modifies the delivered specifications and creates new specifications. For more information, see Spec Editor. |
|
SPECOPTION |
Optional Items - Places a component when the component type in the specification has an optional component. For more information, see Optional Items. |
|
SPECVIEW |
Spec View - Filters the available components based on the size and specification settings. For more information, see Spec View. |
|
SPECVIEWCLOSE |
SPEC View Close - Closes the Spec View dialog box . |
|
SPIP |
Rolled Pipe - Places a free-form pipe component, such as a hose or flexible connection. For more information, see Rolled Pipe. |
|
SPRING |
Spring Hanger- Creates a spring hanger-type restraint. For more information, see Spring Hanger. |
|
STB |
Stub End - Places a stub-end coupling component in the X-Y plane. For more information, see Stub End. |
|
STDBOLT |
Standard - Places standard stud bolts at the selected location. For more information, see Standard. |
|
STOPSIGN |
Stop Sign - Places Isogen stop sign symbols in the drawing. For more information, see Stop Sign. |
|
STRF |
Flanged Plan - Places a flanged pipe component in the X-Y plane. For more information, see Flanged Plan. |
|
STRS |
Socket Strainer - Set a socket strainer in the X-Y plane. |
|
STRT |
SW/Thrd Plan - Places a socket weld/ threaded strainer component in the X-Y plane. For more information, see SW/Thrd Plan. |
|
STUE |
Sanitary Stub - Places a sanitary stub coupling component in the X-Y plane. For more information, see Sanitary Stub. |
|
SUSER |
User Shape - Places a component using a custom user shape. For more information, see User Shape. |
|
SWGC |
Thrd/SW Conc Swage - Places a concentric reducer swage in the X-Y plane. For more information, see Thrd/SW Conc Swage. |
|
SWGCS |
FRP Bell Conc w/Hub - Places a threaded/socket concentric reducer component in the X-Y plane. For more information, see Threaded/Socket Concentric Reducer. |
|
SWGCT |
Thrd/SW Conc w/Hub - Places a concentric reducer with threaded hub in the X-Y plane. For more information, see Thrd/SW Conc w/Hub. |
|
SWGE |
Thrd/SW Ecc Swage - Places an eccentric reducer swage in the X-Y plane. For more information, see Thrd/SW Ecc Swage. |
|
SWGES |
FRP Bell Ecc w/Hub - Places an eccentric threaded/socket reducer component in the X-Y plane. For more information, see Threaded/Socket Eccentric Reducer. |
|
SWGET |
Thrd/SW Ecc w/Hub - Places an eccentric reducer with threaded hub in the X-Y plane. For more information, see Thrd/SW Ecc w/Hub. |
|
SYNC |
Synchronize - Checks all components in the drawing and updates them according to the current value in the database. For more information, see Synchronize Pipe Database. |
|
SYSVIS |
System Visibility - Turns on or off visibility of components usually located on the system layer. For more information, see System Visibility. |
|
TAGINSERT |
Insert Tag - Places a tag on the drawing without having to run a Bill of Material. For more information, see Insert Tag. |
|
TAGRELOCATE |
Tag Location - Moves a tag. For more information, see Tag Location. |
|
TAGTOGGLE |
Tag Toggle - Turns on and off the placement of tags. For more information, see Tag Toggle Bill of Material, Tag Toggle Bill of Material. |
|
TAP |
Tap Connection - Creates tap connections for use by Isogen. For more information, see Tap. |
|
TEFL |
Lined Tee Plan - Places a flanged and lined tee in the X-Y plane. For more information, see Flanged Tee Plan. |
|
TERE |
Lined Reducing Tee Plan - Places a flanged and lined reducing tee in the X-Y plane. For more information, see Reducing Tee Plan. |
|
TERS/TERT |
Thrd/SW Tee Red Plan - Places a straight threaded/socket reducing tee in the X-Y plane. For more information, see Thrd/SW Tee Red Plan. |
|
TERW |
Plan Reducing Tee - Places a straight reducing tee in the X-Y plane. For more information, see Plan Reducing Tee. |
|
TESE |
Sanitary Tee Plan - Places a straight sanitary tee in the X-Y plane. For more information, see Sanitary Tee Plan. |
|
TESS |
FRP Bell Tee Plan - Places a straight threaded/socket tee in the X-Y plane. For more information, see Threaded/Socket Straight Tee Plan. |
|
TESS/TEST |
Thrd/SW Tee Plan - Places a threaded/socket straight tee in the X-Y plane. For more information, see Thrd/SW Tee Plan. |
|
TESW |
Plan Tee - Places a straight tee in the X-Y plane. For more information, see Plan Tee. |
|
TEXTHEIGHT |
Height - Changes the height of selected text by matching it with other text. For more information, see Height. |
|
TICK |
Tick Mark - Shows which side of the dimension extension line the gasket is on. For more information, see Tick Mark. |
|
TMODE |
Threaded Mode - Model in threaded pipe mode. |
|
TOL |
Thrd in Plan - Places a threadolet fitting in the X-Y plane. For more information, see Threadolet Thread in Plan. |
|
TOPWORKSADD, TOPADD |
Top Works Add - Adds top works to a valve already drawn in the model. For more information, see Top Works Add. |
|
TOPWORKSCHANGE, TOPCHG |
Top Works Change - Changes the orientation of or deletes top works already associated with a valve. For more information, see Top Works Change. |
|
TRANSLATIONAL |
Translational - Creates a translational-type restraint. For more information, see Translational. |
|
TUBE |
Tube - Attaches tubing to any 2D or 3D polyline. For more information, see Tube. |
|
UBEN |
Sanitary U-Bend Plan - Places a 180 degree u-bend in the X-Y plane. For more information, see Sanitary U-Bend Plan. |
|
UCS |
UCS Object - Orients the current user coordinate system according to an object that you select. For more information, see UCS Object. |
|
UCSNEXT |
Next - Places the current user coordinate system in the next position. For more information, see UCS Next. |
|
UNS/UNT |
Thrd/SW Union - Places a threaded/socket union in the X-Y plane. For more information, see Thrd/SW Union. |
|
USE1 |
User Shape 1 - Places user created shape 1 in the X-Y plane. For more information, see User Shapes. |
|
USE2 |
User Shape 2 - Places user created shape 2 in the X-Y plane. For more information, see User Shapes. |
|
USE3 |
User Shape 3 - Places user created shape 3 in the X-Y plane. For more information, see User Shapes. |
|
USE4 |
User Shape 4 - Places user created shape 4 in the X-Y plane. For more information, see User Shapes. |
|
USE5 |
User Shape 5 - Places user created shape 5 in the X-Y plane. For more information, see User Shapes. |
|
USERCREATE |
Create - Creates symmetrical or non-symmetrical user shape components. For more information, see User Shapes. |
|
V11EN |
Sanitary 11.25 Ell Vertical - Places an 11.25 degree elbow normal to the X-Y plane when the previous or next run is vertical to the X-Y plane. For more information, see Sanitary 11.25 Ell Vertical. |
|
V11LR |
Vert 11.25 Ell - Places an 11.25 degree elbow normal to the X-Y plane. For more information, see Vert 11.25 Ell. |
|
V18LR |
Vert 180 LR Return - Places a 180 degree long radius return normal to the X-Y plane with the return ends also normal to the X-Y plane. For more information, see Vert 180 LR Return. |
|
V18SR |
Vert 180 SR Return - Places a 180 degree short radius return normal to the X-Y plane with the return ends also normal to the X-Y plane. For more information, see Vert 180 SR Return. |
|
V22EN |
Sanitary 22.5 Ell Vertical - Places a 22.5 degree elbow normal to the X-Y plane when the previous or next run is vertical to the X-Y plane. For more information, see Sanitary 22.5 Ell Vertical. |
|
V22LR |
Vert 22.5 Ell - Places a 22.5 degree elbow normal to the X-Y plane. For more information, see Vert 22.5 Ell. |
|
V3VE |
Sanitary 3-Way Valve Vertical - Places a sanitary 3-way valve component with the main normal to the X-Y plane. For more information, see Sanitary 3-Way Valve Vertical. |
|
V3VF |
3 Way Vertical - Places a three-way valve component with the main normal to the X-Y plane. For more information, see 3-Way Vertical Valve. |
|
V3VS/V3VT |
Thrd/SW 3 Way Vertical - Places a threaded or socket weld three-way valve with the main normal to the X-Y plane. For more information, see Thrd/SW 3 Way Vertical . |
|
V45EN |
Sanitary 45 Ell Vertical - Places a 45 degree sanitary elbow normal to the X-Y plane. For more information, see Sanitary 45 Ell Vertical. |
|
V45FL |
Lined 45 Ell Vert - Places a 45 degree flanged and lined elbow normal to the X-Y plane. For more information, see Flanged 45 Degree Elbow Vert. |
|
V45LR |
Vert 45 Ell - Places a 45 degree elbow normal to the X-Y plane when the previous or next run is vertical to the X-Y plane. For more information, see Vert 45 Ell. |
|
V45S |
FRP Bell 45 Ell Vert - Places a 45 degree elbow normal to the X-Y plane. For more information, see Threaded/Socket 45 Degree Elbow Vert. |
|
V45S/V45T |
Thrd/SW 45 Ell Vert - Places a 45 degree threaded/socket elbow normal to the X-Y plane. For more information, see Thrd/SW 45 Ell Vert. |
|
VCPRS/VCPRT |
Thrd/SW Reducing Clpg End - Places a threaded/socket reducing coupling end normal to the X-Y plane. For more information, see Thrd/SW Reducing Clpg End. |
|
VCPS |
FRP Bell Full Clpg End - Places a full coupling end normal to the X-Y plane. For more information, see Full Coupling End. |
|
VCPS/VCPT |
Thrd/SW Full Clpg End - Places a threaded/socket full coupling end normal to the X-Y plane. For more information, see Thrd/SW Full Clpg End. |
|
VCRRE |
Lined Reducing Cross Vert - Places a four-way flanged and lined reducing cross with the main normal to the X-Y plane. For more information, see Cross Reducing Vertical. |
|
VCRRW |
Vert Reducing Cross - Places a four-way reducing cross with the main branch normal to the X-Y plane. For more information, see Vert Reducing Cross. |
|
VEOLS |
EOL-SW in Vert - Places an elbowlet fitting normal to the X-Y plane on a side elbow. For more information, see Elbowlet Socket Weld in Vertical. |
|
VEOLT |
EOL-Thrd in Vert - Places an elbowlet fitting normal to the X-Y plane on a side elbow. For more information, see Elbowlet Thread in Vertical. |
|
VEOLW |
EOL-Weld in Vert - Places an elbowlet fitting normal to the X-Y plane on a side elbow. For more information, see Elbowlet Weld in Vertical. |
|
VHCPS/VHCPT |
Thrd/SW Half Clpg End - Places a threaded/socket half coupling component end normal to the X-Y plane. For more information, see Thrd/SW Half Clpg End. |
|
VIEWBOX |
Box - Creates views based on a picked box. For more information, see Box. |
|
VIEWCLIP |
View Clip - Clips the view at the present plane set by the UCS. |
|
VIEWEAST |
East - Places the current user coordinate system in the east position. For more information, see East. |
|
VIEWEDIT |
Edit - Edits a views box. For more information, see Edit. |
|
VIEWEDITALL |
View Edit All - Opens the View Creation dialog box. |
|
VIEWFLAT |
Flat - Places the current user coordinate system in the flat position. For more information, see Flat. |
|
VIEWNORTH |
North - Places the current user coordinate system in the north position. For more information, see North. |
|
VIEWSOUTH |
South - Places the current user coordinate system in the south position. For more information, see South. |
|
VIEWWEST |
West - Places the current user coordinate system in the west position. For more information, see West. |
|
VLARE |
Sanitary Lateral Reducing Vertical -Places a 45 degree sanitary reducing lateral with the main normal to the X-Y plane. For more information, see Sanitary Lateral Reducing Vertical. |
|
VLATE |
Lined Lateral Vert - Places a 45 degree flanged and lined lateral with the main normal to the X-Y plane. For more information, see Lateral Vertical. |
|
VLATS |
FRP Bell Lateral Vert - Places a 45 degree threaded/socket lateral with the main normal to the X-Y plane. For more information, see Threaded/Socket Lateral Vert. |
|
VLATS/VLATT |
Thrd/SW Lateral Vert - Places a 45 degree threaded/socket lateral with the main normal to the X-Y plane. For more information, see Thrd/SW Lateral Vert. |
|
VLATW |
Vert Lateral - Places a 45 degree lateral tee with the main normal to the X-Y plane. For more information, see Vert Lateral. |
|
VNOLP |
Weld in Vertical - Places a nipolet fitting normal to the X-Y plane. The branch end of the fitting is plain. For more information, see Nipolet Weld in Vertical. |
|
VNOLT |
Thrd in Vertical - Places a nipolet fitting normal to the X-Y plane. The branch end of the fitting is threaded. For more information, see Nipolet Thread in Vertical. |
|
VRELF |
Pressure Top - Places a 90 degree pressure relief valve with the pressure end normal to the X-Y plane. For more information, see Pressure Top Valve. |
|
VRELS/VRELT |
Thrd/SW Pressure Top - Places a threaded or socket weld 90 degree pressure relief valve with the pressure end normal to the X-Y plane. For more information, see Thrd/SW Pressure Top. |
|
VSO |
SW in Vertical - Places a sockolet fitting normal to the X-Y plane. For more information, see Sockolet Socket Weld in Vertical. |
|
VSOL |
Saddle in Vertical - Places a soc-o-let with the main normal to the X-Y plane. For more information, see Saddle in Vertical. |
|
VSPCT |
Spec Bld Vert - Places a blind spectacle with the main normal to the X-Y plane. For more information, see Spectacle Blind Vertical. |
|
VTEFL |
Lined Tee Vert - Places a flanged and lined tee with the main normal to the X-Y plane. For more information, see Flanged Tee Vertical. |
|
VTERE |
Lined Reducing Tee Vert - Places a flanged and lined reducing tee with the main normal to the X-Y plane. For more information, see Reducing Tee Vertical. |
|
VTERS/VTERT |
Thrd/SW Tee Red Vert - Places a threaded/socket reducing straight tee with the main normal to the X-Y plane. For more information, see Thrd/SW Tee Red Vert. |
|
VTERW |
Vert Reducing Tee - Places a straight reducing tee with the main normal to the X-Y plane. For more information, see Vert Reducing Tee. |
|
VTESE |
Sanitary Tee Vertical - Places a straight sanitary tee with the main normal to the X-Y plane. For more information, see Sanitary Tee Vertical. |
|
VTESS |
FRP Bell Tee Vert - Places a straight threaded/socket tee with the main normal to the X-Y plane. For more information, see Threaded/Socket Straight Tee Vert. |
|
VTESS/VTEST |
Thrd/SW Tee Vert - Places a threaded/socket straight tee with the main normal to the X-Y plane. For more information, see Thrd/SW Tee Vert. |
|
VTESW |
Vert Tee - Places a straight tee with the main normal to the X-Y plane. For more information, see Vert Tee. |
|
VTOL |
Thrd in Vertical - Places a threadolet fitting normal to the X-Y plane. For more information, see Threadolet Thread in Vertical. |
|
VUBEN |
Sanitary U-Bend Vertical - Places a 180 degree u-bend normal to the X-Y plane with the return ends also normal to the X-Y plane. For more information, see Sanitary U-Bend Vertical. |
|
VWOL |
Weld in Vertical - Places a weldolet fitting normal to the X-Y plane. For more information, see Weldolet Weld in Vertical. |
|
VYB |
Vert Wye - Places a wye normal to the X-Y plane with the branches also normal to the X-Y plane. For more information, see Vert Wye. |
|
VYE |
Sanitary Wye Vertical - Places a sanitary wye normal to the X-Y plane with the branches also normal to the X-Y plane. For more information, see Sanitary Wye Vertical. |
|
VYFL |
Lined Wye Vert - Places a flanged and lined wye normal to the X-Y plane with the branches also normal to the X-Y plane For more information, see Lined Wye Vert. |
|
WELD |
Weld Gap - Creates weld gaps For more information, see Weld Gap. |
|
WELDS |
Weld - Opens the Weld Symbols dialog box in which you select a weld symbol graphic to place on the drawing. For more information, see Weld. |
|
WELDSIZE |
Weld Size - Sets the default size of the weld dots that accompany single line components. For more information, see Weld Size. |
|
WELDTOTAL |
Weld Total - For more information, see Weld Total. |
|
WOL |
Weld in Plan - Places a weldolet fitting in the X-Y plane. For more information, see Weldolet Weld in Plan. |
|
XCEDIT |
Xref Component Edit - Views sizes or information within the component XREF. For more information, see XREF Edit. |
|
XDEALL |
XDATA All Equipment - Print all equipment XDATA to the command line. |
|
XDENOZZLES |
XDATA Equipment Nozzles - Print equipment nozzle XDATA to the command line. |
|
XDH |
XDATA HVAC - Print HVAC XDATA to the command line. |
|
XDP |
XDATA Pipe - Print selected pipe XDATA to the command line. |
|
XDP5 |
XDATA All Pipe - Print all pipe XDATA to the command line. |
|
YB |
Plan Wye - Places a wye in the X-Y plane. For more information, see Plan Wye. |
|
YE |
Sanitary Wye Plan - Places a sanitary wye in the X-Y plane. For more information, see Sanitary Wye Plan. |
|
YFL |
Lined Wye Plan - Places a flanged and lined wye in the X-Y plane. For more information, see Lined Wye Plan. |
|
ZOOMF |
Zoom Factors - Zooms an Mview to a specified scale. For more information, see Zoom Factors. |
|
ZOOMLOCK |
Zoom Lock - Allows zooming in paper space only. For more information, see Zoom Lock. |