Plant menu: Toolbars > Victaulic
The commands on the Victaulic toolbar can be used for modeling in 3D or 2D mode depending on how you define the drawing mode. For more information, see 3D Modeling versus 2D Modeling.
Command Name |
Command Line |
|
---|---|---|
Pipe - Places a victaulic pipe component. For more information, see Pipe. |
PIPW |
|
Plan 90 LR Ell - Places a 90 degree long radius elbow in the X-Y plane. For more information, see Plan 90 LR Ell. |
90LR |
|
Plan 90 SR Ell - Places a 90 degree short radius elbow in the X-Y plane. For more information, see Plan 90 SR Ell. |
90SR |
|
Plan 45 Ell - Places a 45 degree elbow in the X-Y plane. For more information, see Plan 45 Ell. |
45LR |
|
Plan 90 Reducing Ell - Places a 90 degree reducing elbow in the X-Y plane. For more information, see Plan 90 Reducing Ell. |
90RD |
|
Side 90 Reducing Ell - Places a 90 degree reducing elbow normal to the X-Y plane. For more information, see Side 90 Reducing Ell. |
H90RD |
|
Plan 11.25 Ell - Places an 11.25 degree elbow in the X-Y plane. For more information, see Plan 11.25 Ell. |
11LR |
|
Plan 22.5 Ell - Places a 22.5 degree elbow in the X-Y plane. For more information, see Plan 22.5 Ell. |
22LR |
|
Plan Tee - Places a straight tee in the X-Y plane. For more information, see Plan Tee. |
TESW |
|
Plan Reducing Tee - Places a straight reducing tee in the X-Y plane. For more information, see Plan Reducing Tee. |
TERW |
|
Plan Cross - Places a four-way straight cross in the X-Y plane. For more information, see Plan Cross. |
CRSW |
|
Plan Reducing Cross - Places a four-way reducing cross in the X-Y plane. For more information, see Plan Reducing Cross. |
CCRW |
|
Plan Wye - Places a wye in the X-Y plane. For more information, see Plan Wye. |
YB |
|
Plan Lateral - Places a 45 degree lateral in the X-Y plane. For more information, see Plan Lateral. |
LATW |
|
Plan Strainer - Places a strainer in the X-Y plane. For more information, see Flanged Tee Plan. |
TEFL |
|
Conc Reducer - Places a concentric reducer component in the X-Y plane. For more information, see Conc Reducer |
CONC |
|
Ecc Reducer - Places an eccentric reducer component in the X-Y plane. For more information, see Ecc Reducer. |
ECC |
|
Victaulic Cap - Places a pipe cap in the X-Y plane. For more information, see Cap. |
CAPW |
|
Victaulic Coupling - Places a coupling in the X-Y plane. For more information, see Coupling. |
CPS |
|
Victaulic Flange - Places a flange in the X-Y plane. For more information, see Slip-On Flange. |
FLGO |
|
Victaulic Butterfly Valve - Places a butterfly valve component in the X-Y plane. For more information, see Butterfly Valve. |
BFYF |
|
Victaulic Check Valve - Places a check valve component in the X-Y plane. For more information, see Check Valve. |
CHKF |
|
Victaulic Ball Valve - Places a ball valve component in the X-Y plane. For more information, see Ball Valve. |
BALF |
|
Victaulic Plug Valve - Places a plug valve component in the X-Y plane. For more information, see Plug Valve. |
PLUF |
The commands in the table below are designed for modeling in 2D.
Command Name |
Command Line |
|
---|---|---|
Side 90 LR Ell - Places a 90 degree long radius elbow normal to the X-Y plane. For more information, see Side 90 LR Ell. |
H90LR |
|
Side 90 SR Ell - Places a 90 degree short radius elbow normal to the X-Y plane. For more information, see Side 90 SR Ell |
H90SR |
|
Side 45 Ell - Places a 45 degree elbow normal to the X-Y plane. For more information, see Plan 45 Ell. |
H45LR |
|
Vert 45 Ell - Places a 45 degree elbow normal to the X-Y plane. For more information, see Vert 45 Ell. |
V45LR |
|
Side 11.25 Ell - Places an 11.25 degree elbow normal to the X-Y plane. For more information, see Side 11.25 Ell. |
H11LR |
|
Vert 11.25 Ell - Places an 11.25 degree elbow normal to the X-Y plane. For more information, see Vert 11.25 Ell. |
V11LR |
|
Side 22.5 Ell - Places a 22.5 degree elbow normal to the X-Y plane. For more information, see Side 22.5 Ell. |
H22LR |
|
Vert 22.5 Ell - Places a 22.5 degree elbow normal to the X-Y plane. For more information, see Vert 22.5 Ell. |
V22LR |
|
Side Tee - Places a straight tee with the branch normal to the X-Y plane. For more information, see Side Tee. |
HTESW |
|
Vert Tee - Places a straight tee with the main normal to the X-Y plane. For more information, see Vert Tee. |
VTESW |
|
Side Reducing Tee - Places a straight reducing tee with the branch normal to the X-Y plane. For more information, see Side Reducing Tee. |
HTERW |
|
Vert Reducing Tee - Places a straight reducing tee with the main normal to the X-Y plane. For more information, see Vert Reducing Tee. |
VTERW |
|
Side Cross - Places a four-way straight cross with the branch normal to the X-Y plane. For more information, see Side Cross. |
HCRSW |
|
Side Reducing Cross - Places a four-way reducing cross with the reducing branch normal to the X-Y plane. For more information, see Side Reducing Cross. |
HCCRW |
|
Vert Reducing Cross - Places a four-way reducing cross with the main normal to the X-Y plane. For more information, see Vert Reducing Cross. |
VCRRW |
|
Side Wye - Places a wye on the X-Y plane with the branches normal to the X-Y plane. For more information, see Side Wye. |
HYB |
|
Vert Wye - Places a wye normal to the X-Y plane with the branches also normal to the X-Y plane. For more information, see Vert Wye. |
VYB |
|
Side Lateral - Places a 45 degree lateral in the X-Y plane with the branch in the X-Z or Y-Z plane. For more information, see Side Lateral. |
HLATW |
|
Vert Lateral - Places a 45 degree lateral with the main normal to the X-Y plane. For more information, see Vert Lateral. |
VLATW |
|
Side Strainer - Places a strainer with the branch normal to the X-Y plane. For more information, see Flanged Tee Side. |
HTEFL |
|
Vert Strainer - Places a strainer with the main normal to the X-Y plane. For more information, see Flanged Tee Vertical. |
VTEFL |
You must use one of the Victaulic default specifications that are supplied with CADWorx for the icons to work on the toolbar.
This toolbar provides components manufactured by Victaulic Corporation. The Victaulic specifications and data files have been provided by Victaulic and can be used to draw components supplied by this company. The specifications supplied are for AWWA, IPS, 304, 316, and PFCS type components.