Select connection points based on the images below, where one is the first pick, two is the second pick, and so on.
PCF Identification |
Valid SKEY |
Connection Points |
Connection Points Order |
NUT |
BNUT |
1 |
|
CAP |
KA** |
2 |
|
MISC-COMPONENT-RETURN INSTRUMENT-RETURN |
BR** C4**, H4**, IO** |
2 2, 4 |
|
TEE |
TE**, TS** |
3 |
|
TEE |
TE**, TS** |
3 |
The third point in the example uses a 45 degree connection direction. |
TEE |
TE**, TS** |
4 |
You can use the Tee identifier for side-outlet elbows. You can use the optional fourth geometry point to define the main connection port center point location. G=Geometry |
REDUCER- CONCENTRIC-TEED |
CT** |
3 |
|
REDUCER- ECCENTRIC-TEED |
EX** |
3 |
|
VALVE-3WAY |
V3** |
3 |
|
VALVE-4WAY |
V4** |
4 |
|
MISC-COMPONENT-ANGLE |
BA** |
3 |
|
ELBOW |
EL** |
3 |
|
CROSS |
CR** |
4 |
|
CROSS |
CR** |
5 |
You can use the Cross identifier for side-outlet Tees. Use the optional fifth geometry point to define the main connection port center point location. G=Geometry |
MISC-COMPONENT-OFFSET*^ FILTER-OFFSET INSTRUMENT-OFFSET TRAP-OFFSET |
BO** BO** C4**, H4**, IO** TO** |
2-4 2 2, 4 2, 4 |
|
VALVE-ANGLE FILTER-ANGLE INSTRUMENT-ANGLE TRAP-ANGLE |
AV** FA** CA** TA** |
2 |
|
VALVE-MULTIWAY- |
MD** |
7 |
|
VALVE-MULTIWAY- |
MD** |
9 |
*^For MISC-COMPONENT-OFFSET, point 1 and point 2 are required. Point 3 and Point 4 are optional.