-
Create a drawing to use as a graphic overlay on a valve, and then save and close the drawing. If you already have a valve drawing created, you can select that drawing in the following procedure.
You must set a specification before you can run this command.
-
Click Graphics Overlay Editor , or type COMPONENTDWGBLOCKEDIT on the command line, and then press ENTER.
The Graphics Overlay Editor dialog box displays.
-
Select a valve type.
-
Click in the DWGNAME box next to the size you want to assign for the graphic overlay.
-
Select Select Block (or Drawing).
The Select Drawing dialog box displays.
-
Select a drawing that contains a graphic overlay block, and then click Open.
-
Click Apply.
-
Click OK.
Next, see Display graphic overlays of valve components in the 3D model.