General
Dimensions
Center Post
Select this option to use a center post in the stair rather than a vessel.
Toe Plate
Select this option to add toe plates to the steps.
Define Exit Point
Select this option to define the exit point of the stair.
Landing
Select this option to add landing dimensions to the stair properties.
Braced
Select this option to add bracing dimensions to the stair properties.
Grating Template
Select a template from those available in the Structure Project file (.sprj).
Vessel Diameter
Define the diameter of the vessel around which the stair is placed.
This field is only available when Center Post is not selected.
Brace Height
Specify the height of the stair bracing.
Width
Specify the width of the stair.
Landing Length
Specify the length of landings on the stair.
Max Rise
Define the maximum vertical distance between each step surface.
Run
Define the horizontal distance between the front of each step.
Members
Treads
Shape
Select a member shape from those available in the Project file.
Section Data Table
Select a section data table from those available in the data tables for the member type. The list changes based on the Section Type setting and populates the Member Size list.
Member Size
Select a size from those available in the data tables for the member type.
Material
Select a material from those available in the Project file.
Tread Tapered
Select this option if the stair has tapered tread.
Outside Sweep Angle
Define the angle at which the tread is tapered.
Braced
Shape
Select a member shape from those available in the Project file.
Section Data Table
Select a section data table from those available in the data tables for the member type. The list changes based on the Section Type setting and populates the Member Size list.
Member Size
Select a size from those available in the data tables for the member type.
Material
Select a material from those available in the Project file.
Angle
Specifies the angle, in degrees, by which the cross-section is rotated about the member axis.
Cardinal Point
Specifies the relative position of the structural cross-section to the member placement line.
Reflect
Reflects or mirrors the cross-section about the member's local z-axis.
Center Post
Shape
Select a member shape from those available in the Project file.
Section Data Table
Select a section data table from those available in the data tables for the member type. The list changes based on the Section Type setting and populates the Member Size list.
Member Size
Select a size from those available in the data tables for the member type.
Material
Select a material from those available in the Project file.
Angle
Specifies the angle, in degrees, by which the cross-section is rotated about the member axis.
Cardinal Point
Specifies the relative position of the structural cross-section to the member placement line.
Reflect
Reflects or mirrors the cross-section about the member's local z-axis.
Landing
Shape
Select a member shape from those available in the Project file.
Section Data Table
Select a section data table from those available in the data tables for the member type. The list changes based on the Section Type setting and populates the Member Size list.
Member Size
Select a size from those available in the data tables for the member type.
Material
Select a material from those available in the Project file.
Angle
Specifies the angle, in degrees, by which the cross-section is rotated about the member axis.
Cardinal Point
Specifies the relative position of the structural cross-section to the member placement line.
Reflect
Reflects or mirrors the cross-section about the member's local z-axis.
Toe Plate
Shape
Select a member shape from those available in the Project file.
Section Data Table
Select a section data table from those available in the data tables for the member type. The list changes based on the Section Type setting and populates the Member Size list.
Member Size
Select a size from those available in the data tables for the member type.
Material
Select a material from those available in the Project file.
Angle
Specifies the angle, in degrees, by which the cross-section is rotated about the member axis.
Cardinal Point
Specifies the relative position of the structural cross-section to the member placement line.
Reflect
Reflects or mirrors the cross-section about the member's local z-axis.