Insert a stair by points - CADWorx - Help

Show Me

1. Click Assemblies on the Model panel.

   The Assemblies palette displays.

2. Click Stair .

   The Stair palette displays.

3. Click Straight .

4. Select a Template.

   OR

   Fill in the stair data as needed. For more information, see Stair.

5. Check or clear Auto Handrail. If checked, select a Handrail Template.

6. Select Pick Point from the Place By list.

7. Click Insert.

8. Click a point in the model space where you want to place the stair. The example below shows that 12" in on the beam at the center point of a handrail is selected.

   

9. Select a point below the first point to define the elevation of the stair. Alternatively, you can type the elevation on the command line. For example, select the end point of the column next to the insertion point of the stair, as shown below.

   

10. Click the direction in which want to place the stair. For example, if you want the stair to face away from the landing, click to the west, as shown below.

    

    The software places the stair.