Name Chamfer Part Edges - Intergraph Smart 3D - Reference Data - Hexagon PPM

Name geometric elements of the parts in the symbol.

1. On the Web Cut Symbols toolbar, click Add Edge Names .

2. Clear Representation Geometry Only, so that all geometry in the symbol is shown.

3. In the Attribute name box, choose EdgeName.

4. Select the OppositePart offset face line. The corresponding row highlights in the table.

5. In the Value box, type Offset.

6. Click Apply.

   

7. Repeat for the Part edges, using the following names:

   • Type Edge for Part edge in the Value box.

   • Type Offset for Part offset face in the Value box.

8. Click OK.