Draw Toolbar - Intergraph Smart 3D - Reference Data - Hexagon PPM

Select Tool - Use to select, modify, and manipulate elements. For more information, see Select Tool

SmartSelect - Creates a select set by drawing a rectangular or polygonal fence around objects based on points that you define. For more information, see SmartSelect Command.

Line - Draws a line. For more information, see Line Command.

Line/Arc Continuous - Draws one line or a series of connected lines. For more information, see Line/Arc Continuous Command.

Place Doubleline - Draws a doubleline or a series of connected doublelines. For more information, see Place Doubleline Command.

Connector - Connects two elements together. For more information, see Connector Command.

Tangent Arc - Draws an arc tangent or perpendicular to one or two elements. For more information, see Tangent Arc Command.

Arc by 3 Points - Draws an arc using three points. For more information, see Arc by 3 Points Command.

Arc by Center Point - Draws an arc using three points. For more information, see Arc By Center Point Command.

Curve - Draws a smooth, open or closed curve. For more information, see Curve Command.

FreeForm - Draws freeform curves or splines. For more information, see FreeForm Command.

FreeSketch - Draws lines, arcs, rectangles, and circles by converting a sketch into a precision drawing. For more information, see FreeSketch Command.

Circle by Center Point - Draws a circle using a center point and radius. For more information, see Circle by Center Point Command.

Circle by 3 Points - Draws a circle using three points that define the circumference. For more information, see Circle by 3 Points Command.

Tangent Circle - Draws a circle tangent to one or two elements. For more information, see Tangent Circle Command.

Ellipse by Center Point - Draws an ellipse using the center point and two edge points. For more information, see Ellipse by Center Point Command.

Ellipse by 3 Points - Draws an ellipse using three edge points. For more information, see Ellipse by 3 Points Command.

Rectangle - Draws a rectangle using three points. For more information, see Rectangle Command.

Fillet Rectangle - Draws a fillet rectangle using four points and a fillet radius that you define. For more information, see Fillet Rectangle Command.

Polygon - Draws an n-sided polygon based on properties you define. For more information, see Polygon Command.

Polygon by Center - Draws an n-sided polygon based on properties you define. For more information, see Polygon by Center Command.

Revision Cloud - Places a cloud around objects in a drawing. For more information, see Revision Cloud Command.

Point - Draws a point. For more information, see Point Command.

Fillet - Draws a fillet between two elements. For more information, see Fillet Command.

Chamfer - Draws a chamfer, or bevel. For more information, see Chamfer Command.

Trim - Trims open and closed elements to the closest intersection in both directions. For more information, see Trim Command.

Trim Corner - Draws a corner by extending or trimming two selected open elements. For more information, see Trim Corner Command.

Custom Curve Trim - Changes the display (symbology) of a curve to show a shorter (trimmed) curve. The original curve geometry is kept in the file. For more information, see Custom Curve Trim.

Split - Provides a variety of modes for splitting graphic elements. For more information, see Split Command

Trim to Element - Trims the selected element to another selected element. For more information, see Trim to Element Command.

Trim to Point - Trims the selected element to a point in space. For more information, see Trim to Point Command.

Trim Inside - Trims within the selected element (partial delete). For more information, see Trim Inside Command.

Extend to Next - Extends one or more open elements until they intersect with the nearest element. For more information, see Extend to Next Command.

Extend to Point - Extends one or more open elements to a point in space or to another element. For more information, see Extend to Point Command.

Fill - Places a solid color or pattern inside a closed boundary. For more information, see Fill Command.

Mask - Masks out underlying graphics without deleting or trimming. For more information, see Mask Command.

Create Symbol - Creates a symbol from elements. For more information, see Create Symbol Command.