Tangent Arc Command - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D 2D Symbols

Language
English
Product
Intergraph Smart 3D
Subproduct
2D Symbols
Search by Category
Reference Data
Smart 3D Version
13
SmartSketch Version
11

Tangent Arc Draws an arc tangent or perpendicular to one or two elements. The first point defines one end of the arc. If you place the first point on a key point of an element you want the arc to be tangent or perpendicular to, then the second point defines the sweep.

Arc tangent

If you place the first point in free space, then this command works like Arc by 3 Points. In this case the first point defines an end point. You can then either define a point on the arc and then the end point, or the end point and then a point on the arc.

SHARED Tip While in dynamics for the second point, you can set the orientation of the arc by passing the pointer through one of the four quadrants of the first point's intent zone.

See Also

Draw an Arc Tangent to Two Elements
Arc Ribbon