Name End Cut Profile Sketch Points - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D 2D Symbols

Language
English
Product
Intergraph Smart 3D
Subproduct
2D Symbols
Search by Category
Reference Data
Smart 3D Version
13
SmartSketch Version
11

Specify points that map the web end cut to profile sketch geometry.

Web Cut

  1. On the WebCut Addin toolbar, click Add Point Properties .

    The Define Mapping Points dialog box displays.

  2. In the Point Name field, select WebCutPoint.

  3. Select a web cut point. The corresponding point highlights in the table

  4. In the Attribute setting field, type the name. The name is the same as the bounded part curve on which the point lies. See Creating End Cuts for more information. In the example, the correct names are Top and Bottom.

  5. Click Apply.

  6. Repeat until all web cut points are named.

  7. Click OK.

Flange Cut

  1. On the Flange Cut Addin toolbar, click Add Point Properties .

    The Define Mapping Points dialog box appears.

  2. In the Point Name field, choose FlangeCutPoint.

  3. Select a flange cut point. The corresponding point highlights in the table.

  4. In the Attribute setting box, type the name. See Creating End Cuts for proper naming conventions. In the example, the correct name is Profile.

  5. Click Apply.

  6. Repeat until all flange cut points are named.

  7. Click OK.