Define Port Alignment - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Catalog

Language
English
Product
Intergraph Smart 3D
Subproduct
Catalog
Search by Category
Help
Smart 3D Version
13.1
  1. In the tree view, click Piping > Piping Specification > Model Rules > Port Alignment.

  2. Click the Insert Row Command to insert a blank row in the grid view.

  3. Define the nominal piping diameter range for the port alignment that you are defining.

  4. In the End Preparation column, type the end preparation code for the port alignment.

  5. In the Method of Trimming column, enter the code for the method of trimming.

  6. In the Acceptable Alignment Tolerance column, specify the maximum angular variation between the branch centerline and the header centerline.

  • Valid end preparation codes are listed in the End Preparation select list.

  • Valid trimming method codes are listed in the Methods of Trimming select list.

  • The Port Alignment sheet in the workbook corresponds to the Port Alignment Rule node. See Piping Reference Data.