Mechanical Joint Allowable Pipe End Separation Rule - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Catalog

Language
English
Product
Intergraph Smart 3D
Subproduct
Catalog
Search by Category
Help
Smart 3D Version
13

The Mechanical Joint Allowable Pipe End Separation Rule node (the MechJointAllowPipeEndSeparation sheet in the Victaulic Spec A4.xls and Victaulic Spec A11.xls workbooks) specifies the allowable metal-to-metal gap between the two pipes at a mechanical joint for a given NPD.

SP3D PIPE Mechanical Joint Allowable Pipe End Separation Rule CONCEPT

Geometric Industry Practice (Optional)

Select the source used in the preparation of the separation rule.

Geometric Industry Standard (Required)

Select the source used in the preparation of the separation rule.

Nominal Diameter From (Required)

Define the lower bound of the largest nominal piping diameter for which this end separation applies.

Nominal Diameter To (Required)

Define the upper bound of the largest nominal piping diameter for which this end separation applies.

Nominal Piping Diameter Units (Required)

Specify the units for the nominal pipe diameter value you entered in the Nominal Piping Diameter From/To columns. For example, type mm or in.

Pipe End Separation (Required)

Specify the end separation distance. Be sure you specify the units of measure when defining this value.

Spec Name

Specifies the piping material class to which the rule applies.

See Also

Piping Specification Rules