-
In the tree view, click Piping > Piping Specification > Model Rules > Slip-on Flange Setback Distance.
-
Click the Insert Row Command to insert a blank row in the grid view.
-
Define nominal piping diameter range for the flange setback distance.
-
In the Company Practice Gap column, enter the distance between the flange face and the edge of the interior weld.
-
In the Company Practice Round Off Factor column, enter the value to use to round up the sum of the weld thickness and the gap.
-
In the End Standard column, type the end standard for the bolted end of the slip-on flange.
-
In the Maximum Weld Thickness column, type the maximum weld thickness.
The Slip On Flange Setback Distance sheet in the workbook corresponds to the Slip-on Flange Setback Distance node. See Piping Reference Data.