The TrenchTurnPart worksheet in the Trench_General_Composition.xls workbook defines the properties used by a turn feature in the trench. This worksheet defines the TrenchTurnPartClass.
Head Section
Defines properties for individual turn features. Each section is defined as a contour in the symbol file.
Name
The name of the turn feature as the feature appears in the Catalog task. The name must be unique.
Description
A description of the turn feature.
|
|
1 - Outside Chamfer Y 2 - Outside Chamfer X 3 - Path Direction 4 - Projection Y 5 - Projection X 6 - Inside Chamfer Y 7 - Inside Chamfer X 8 - Included Angle |
ProjectionX
The inside length of the turn feature along the local X axis of the trench path.
ProjectionY
The inside length of the turn feature along the local Y axis of the trench path.
AngleMin
The minimum included angle of the chamfer.
AngleMax
The maximum included angle of the chamfer.
InsideChamfer
The presence of an inside chamfer. Type 1 to create an inside chamfer. Type 0 if no inside chamfer exists.
InsideChamferX
The local X-component of the length of the inside chamfer along the path of the turn.
InsideChamferY
The local Y-component of the length of the inside chamfer along the path of the turn.
OutsideChamfer
The presence of an outside chamfer. Type 1 to create an outside chamfer. Type 0 if no outside chamfer exists.
OutsideChamferX
The local X-component of the length of the outside chamfer along the path of the turn.
OutsideChamferY
The local Y-component of the length of the outside chamfer along the path of the turn.