Modify wall length using 2-D sketch - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Civil

Language
English
Product
Intergraph Smart 3D
Subproduct
Civil
Search by Category
Help
Smart 3D Version
13.1
  1. Click Select on the vertical toolbar.

  2. Set the Locate Filter to Wall Systems.

  3. Select the wall to modify.

    Modify wall length STEP SELECT WALL

  4. Click Select a Path selectapath on the Place Wall Ribbon.

  5. Click Sketch 2D on the ribbon.

  6. Select objects in the model that you want to see when modifying the wall length in the 2- D environment.

  7. Click Draw .

    Modify wall length STEP 2D SKETCH

  8. Click Bottom Up on the ribbon.

  9. Select the wall segment to modify.

  10. In the Length box, key in the new length for the segment, or grab the box at the end of the segment and move it to the new location.

    Modify wall length STEP NEW LOCATION

  11. In the 2-D environment, click Close .

  12. Click Finish.

    Modify wall length STEP 2D FINISHED

  13. Optionally, edit the wall system, type, composition, and other properties.

  14. Optionally, click Select Boundaries to limit the height of the wall.

  15. Click Finish.

    Modify wall length STEP FINISHED