Place a wall by 2-D sketch - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Civil

Language
English
Product
Intergraph Smart 3D
Subproduct
Civil
Search by Category
Help
Smart 3D Version
13.1
  1. Click Place Walls Command on the vertical toolbar.

  2. Define the sketching plane. The sketching plane defines the bottom elevation of the wall.

    Place a wall by 2D sketch STEP SKETCH PLANE

  3. Click Sketch 2D on the Place Wall Ribbon.

  4. Select objects in the model that you want to see when sketching the wall path in the 2-D environment.

    Place a wall by 2D sketch STEP REF OBJs

  5. Click Draw . The 2D sketch orientation is based on the active coordinate system as defined in the PinPoint Command .

    Place a wall by 2D sketch STEP IN 2D ENV

  6. In the 2-D environment, draw the path of the wall. You can draw more than one wall path at a time in the 2-D environment.

    Place a wall by 2D sketch STEP DRAW PATH

  7. In the 2-D environment, click Close .

  8. Click Finish.

    Place a wall by 2D sketch STEP PATH FINISHED

  9. Set the wall system, type, composition, and other properties.

  10. Optionally, click Select Boundaries to limit the height of the wall.

  11. Click Finish to place the walls in the model.

    Place a wall by 2D sketch STEP FINISHED

  12. The software maintains the same sketching plane and prompts you to select references for the next wall. Go back to step 4.

    -OR-

    To define a new sketching plane, click Cancel to return to the main ribbon. Go back to step 2.