Modify a trench feature - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Civil

Language
English
Product
Intergraph Smart 3D
Subproduct
Civil
Search by Category
Help
Smart 3D Version
13
  1. Click Select on the vertical toolbar.

  2. Select Trench Straight Feature/Trench Curve Feature in the Locate Filter.

  3. Select the trench feature to modify.

  4. Using the ribbon controls, edit the trench feature as needed.

  5. Click Finish.

  6. Repeat the previous steps as needed for each feature that is part of the trench path.

    The trench is modified. In the following example, Top Slope is modified for each feature of a trench initially created using Define start depth and top slope define_start_depth_and_top_slope:

    1 - Drawn trench path with varying global Z-coordinates along the path

    2 - Defined bottom cardinal point for cross-section

    3 - Defined start depth from trench cross-section

    4, 5, 6 - Defined top slope for each segment of the trench path

    7 - Defined footing thickness from trench cross-section

    8, 9, 10 - Trench depths computed by (rim elevation from top slope) - (invert elevation from global Z-coordinate of drawn path)