Specifies general properties of the trench part. The property name appears on the left side of the grid, and the corresponding property value appears on the right side of the grid.
While you can edit parts, you cannot delete them.
Category
Specifies the properties category to view. Select Standard, Fabrication and Construction, Surface Treatment and Coating, or Responsibility.
Standard Category
Parent System
Displays the parent system for the object.
Name
Displays the name of the trench part. The name is based on the Naming Rule selection. If you want to type a new name for the trench, select User Defined in the Naming Rule box.
Naming Rule
Specifies the naming rule to use to automatically name the trench. To manually type your own name in the Name box, select User Defined.
Group Name
Specifies the Group Name of the trench part as specified in the trench cross-section symbol.
Group Type
Specifies the Group Type of the trench part as specified in the trench cross-section symbol.
Volume
Displays the volume of the trench part as calculated by the software.
Surface Area
Displays the area of the trench part as calculated by the software.
Reporting Requirement
Specifies the reporting requirement for the object. To change the options on the list, edit the Reporting Type select list in Catalog.
Reporting Type
Specifies the type of reporting. To change the options on the list, edit the Reporting Type select list in Catalog.
Dry Weight
Specifies the total dry weight of the trench, not including liquid or routed systems that may run through the trench. This value is calculated by the software. The weight for the trench is volume ยด density. The volume is defined under the Volume category of the trench run. The density is read from the catalog for the materials defined on the Start Cross-Section tab.
Wet Weight
Specifies the wet weight of the liquid or routed systems that may run through the trench.
Dry CGX
Specifies the X-axis location of the dry center-of-gravity.
Dry CGY
Specifies the Y-axis location of the dry center-of-gravity.
Dry CGZ
Specifies the Z-axis location of the dry center-of-gravity.
Wet CGX
Specifies the X-axis location of the wet center-of-gravity.
Wet CGY
Specifies the Y-axis location of the wet center-of-gravity.
Wet CGZ
Specifies the Z-axis location of the wet center-of-gravity.
<Group Name> Material
Specifies the material used for the part. The name of the part group, such as Left Wall, Right Wall, or Slab, displays as the property name. Material properties are inherited from the trench run and cannot be edited.
A separate line displays in the grid for each part group.
<Group Name> Material Grade
Specifies the material grade used for the part. The name of the part group, such as Left Wall, Right Wall, or Slab, displays as the property name. Material properties are inherited from the trench run and cannot be edited.
A separate line displays in the grid for each part group.
Fabrication and Construction
Specifies values for fabrication and construction requirements.
Fabrication Requirement
Specifies the fabrication requirement for the object. To change the options on the list, edit the Fabrication Type select list in Catalog.
Rule Driven
Specifies that a rule drives the value. This is the default option. Click to switch to User Driven .
User Driven
Allows you to select a value. Click to switch to Rule Driven .
Fabrication Type
Specifies the type of fabrication for the object. To change the options on the list, edit the Fabrication Type select list in Catalog.
Rule Controlled
Specifies that a rule defined for a parent property controls the value. If Rule Controlled does not display, you can select a value.
Construction Requirement
Specifies the construction requirement for the object. To change the options on the list, edit the Construction Requirement select list in Catalog.
Construction Type
Specifies the type of construction for the object. To change the options on the list, edit the Construction Type select list in Catalog.
Surface Treatment and Coating
Specifies values for surface treatment and coating requirements.
Exterior Coating Requirement
Specifies the coating requirement for the object. To change the options on the list, edit the Coating Type select list in Catalog.
Rule Driven
Specifies that a rule drives the value. This is the default option. Click to switch to User Driven .
User Driven
Allows you to select a value. Click to switch to Rule Driven .
Exterior Coating Type
Specifies the type of coating for the object. To change the options on the list, edit the Exterior Coating Type select list in Catalog.
Rule Controlled
Specifies that a rule defined for a parent property controls the value. If Rule Controlled does not display, you can select a value.
Coating Color
Specifies the color of the object coating. To change the options on the list, edit the Coating Color select list in Catalog. Smart 3D includes this property in the painting area report.
Rule Controlled
Specifies that a rule defined for a parent property controls the value. If Rule Controlled does not display, you can select a value.
Exterior Coating Area
Specifies the area of the coating for the object.
Responsibility
Specifies values for departmental or personnel responsibilities.
Cleaning Responsibility
Specifies the party responsible for cleaning the object. To change the options on the list, edit the Cleaning Responsibility select list in Catalog.
Design Responsibility
Specifies the party responsible for designing the object. To change the options on the list, edit the Design Responsibility select list in Catalog.
Fabrication Responsibility
Specifies the party responsible for fabricating the object. To change the options on the list, edit the Fabrication Responsibility select list in Catalog.
Installation Responsibility
Specifies the party responsible for installing the object. To change the options on the list, edit the Installation Responsibility select list in Catalog.
Painting Responsibility
Specifies the party responsible for painting the object. To change the options on the list, edit the Painting Responsibility select list in Catalog.
Requisition Responsibility
Specifies the party responsible for ordering the object. To change the options on the list, edit the Requisition Responsibility select list in Catalog.
Supply Responsibility
Specifies the party responsible for delivering the object. To change the options on the list, edit the Supply Responsibility select list in Catalog.
Testing Responsibility
Specifies the party responsible for testing on the object. To change the options on the list, edit the Testing Responsibility select list in Catalog.