Add CAD details of a support component in the drawings - Intergraph Smart 3D - Help

Intergraph Smart 3D Common

Language
English
Product
Intergraph Smart 3D
Subproduct
Common
Search by Category
Help
Smart 3D Version
13.1

When using the HngSup-CAD Details view style, you can place the CAD details (.sym file) in the drawings. You must specify the location of the .sym file in the Note Text field in the Notes tab of the Control Point Properties Dialog Box for the control point.

  1. In the Hangers and Supports task, place a control point on a support component. Click Insert > Control Point to display the Control Point Ribbon (Placement).

  2. Select the parent object for the control point.

  3. Select CAD Detail from the Subtype list.

  4. Create a note associated with the control point, specifying the location of the .sym file.

    1. Open the Control Point Properties Dialog Box for the control point.

    2. Click the Notes tab.

    3. Click New Note.

    4. Specify the control point properties as follows:

      Select Control Point3 from the Key Point list.

      Select CAD Detail from the Notes at this location, listed by name list.

      Select Fabrication from the Purpose of Note list.

      Type \HangersAndSupports\CAD Details\Utility four hole plate.sym in the Note Text box.

  5. Go to the Drawings and Reports task, and update the drawing for the support component.

    The updated drawing shows the graphic detail of the associated control point note text in the view, where the HngSup – CAD Details view style is activated.

You can create rules to use the control point subtypes to classify the control point for use in drawings and reports. For more information, see Control Point Subtype Sheet in the Smart 3D Reference Data Guide available from the Help > Printable Guides command in the software.