Add the location coordinates of the key plan to drawings - Intergraph Smart 3D - Help

Intergraph Smart 3D Common

Language
English
Product
Intergraph Smart 3D
Subproduct
Common
Search by Category
Help
Smart 3D Version
13

You can indicate the location coordinate of the key plan on the drawings. By default, the location coordinate of the key plan refers to the primary pipe centerline. You can change it by specifying a Key Plan Callout subtype for the control point.

  1. In the Hangers and Supports task, place a control point on a support component. Click Insert > Control Point to display the Control Point Ribbon (Placement).

  2. Select the parent object for the control point.

  3. Select Key Plan Callout from the Subtype list.

  4. Create a note associated with the control point.

    1. Open the Control Point Properties Dialog Box for the control point.

    2. Click the Notes tab.

    3. Click New Note.

    4. Specify the control point properties as follows:

      Select Control Point4 from the Key Point list.

      Select Key Plan Callout from the Notes at this location, listed by name list.

      Select Fabrication from the Purpose of Note list.

      Type KP in the Note Text box.

  5. Start the Drawings and Reports task, and update the drawing for the support component.

    The updated drawing shows the Key Plan coordinate label at the specified control point location in the drawing.

You can create rules to use the control point subtypes to classify the control point for use in drawings and reports. For more information, see Control Point Subtype Sheet in the Smart 3D Reference Data Guide available from the Help > Printable Guides command in the software.