-
Click Select .
-
Select the volume for which you want to modify the path.
You can modify the path for volumes created with Place Volume Along Path Command , but not for volumes created with other volume commands.
-
On the ribbon, click Path to view the Edit Path ribbon.
-
To add one or more segments to the path, click Create.
-
Click the point on the existing path at which you want to insert the new segment.
-
You can use PinPoint Command , Point Along Command, and the SmartSketch relationship indicators when defining your path.
-
You can change the plane for the path by selecting a different plane in the Plane list.
-
To change the segment from a straight line to an arc, click Arc by 3 Points in the Path Type list, and then click three points to define the arc.
-
To switch back to a straight line after sketching an arc, click Line in the Path Type list.
-
To break the path, click No Line in the Path Type list.
-
-
Click to place other points and add to the path as needed.
To change the turn type for the corner, click a different turn type in the Turn Type list, and define the dimensions for the turn in the Value box.
-
After you place all the points for the new segments, click Finish to view the Place Volume Along Path ribbon.
-
Click Finish.
-
The software does not require that you close the path for a volume. You can end the path wherever you want.
-
You can click Edit on the ribbon to change the segment or modify the path further.
-
To manually set the angle and length for a segment of the path, change the values in the Angle and Length boxes on the ribbon.