Member system missing one or more frame connections - Intergraph Smart 3D - Administration & Configuration - Hexagon

Intergraph Smart 3D Database Integrity Administration

Language
English
Product
Intergraph Smart 3D
Subproduct
Database Integrity
Search by Category
Administration & Configuration
Smart 3D Version
13

Message

Member system missing one or more frame connections.

Severity

Normal.

Detailed Description

Every member system has a start and end frame connection. The lifetimes of these frame connections are controlled by the member system; hence, you cannot eliminate an end frame connection unless you delete the member system. Therefore, a member system without a frame connection should not occur.

Possible Cause

Before Version 5 of the software, member systems without frame connections were allowed. Therefore, a migrated model can result in these messages. For a non-migrated model, this situation is abnormal and should not occur.

Possible Impacts

Commands that select a frame connection are affected. Examples of these commands include placement of members at the end of a member, assembly connection placement on a member system, and placement of analysis boundary conditions.

What You Should Do

To re-establish the connectivity of a frame connection, you can complete a manual process, or run a custom database command.

Before fixing this problem, you must have write access to the permission group of the member system. Frame connections always exist beneath the permission group of the member system. A new frame connection can only be generated if you have access to the member.

Manual Solution

  1. Select the member system.

  2. Click the Start and End frame connection buttons on the ribbon. The software creates new frame connections.

Automated Solution

  1. Run the Clean Database custom command.

  2. Select the member system(s) in error, and click Clean Now. The software creates new unsupported frame connections.