Connect conduit end features - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
13

Smart 3D enables you to connect end features of existing conduits using the zero-spec cableway. You can then route cables to pass through the resulting cableway. You can manually connect conduit end features, or you can use the Auto Connect Cableway command on the Drawing toolbar.

Using Auto Connect

  1. Locate the conduits to connect in creating your route.

  2. Click Auto Connect to display the Auto Connect Cableway ribbon.

  3. From the Auto Connect Cableway ribbon, select Conduit End Features from the filter pull-down menu.

  4. Select the conduit end feature in the graphic view to begin the connection.

  5. Click Select to Runs on the Auto Connect Cableway ribbon, and then select the end feature of the conduit to which you want to connect.

  6. Click Finish to automatically calculate and place the new Cws-0 cableway.

Connecting Manually

  1. Locate the conduits you want to connect in creating your route.

  2. Click Route Cableway .

  3. In the graphic view, select the conduit end feature you want as the starting point.

    If you selected an end feature before selecting the Route Conduit command, that feature is the default starting point for the new cableway.

  4. On the New Cableway dialog, set Specifications to Cws-0.

  5. Set other required cableway properties, and then click OK.

  6. Select a conduit end feature in the graphic view to define the endpoint of the connecting cableway.