Displays a list of cables in a grid format.
View Cable Schedule Documents
Returns you to the Cable Schedule Documents dialog. You can also press BACKSPACE.
Refresh
Updates the cable schedule. After modifying the cables in Smart 3D, click Refresh to reflect the changes in the cable schedule.
Cable Name
Displays the name of the cable as defined in the design basis data.
Correlation Status
Displays the correlations status of the cable design basis data with corresponding 3D model data. The colors identify the correlation status of each cable in the model and the design basis object that corresponds to it.
Default Color |
Status |
Description |
Correlated and up-to-date |
The cable in the design basis has a match in the 3D model without any discrepancies in the cable data, and the data is up-to-date. |
|
Correlated, Data Mismatch |
The cable in the design basis has a match in the 3D model. However, there are discrepancies in the cable data. |
|
Uncorrelated |
The cable in the design basis does not exist in the 3D model, or is unknown. |
|
Ignored |
The cable metadata in the design basis is ignored. |
Part Number
Displays the part number for the cable as defined in the design basis data.
Part Description
Displays the short description of the cable part as defined in the design basis data.
From Device
Displays the cable originating equipment code as defined in the design basis data.
To Device
Displays the cable terminating equipment code as defined in the design basis data.
Signal Type
Displays the type of signal the cable will carry as defined in the design basis data.
Validation Status
Displays the validation status of the selected cable. The following are the available validation statuses:
Not Validated
Specifies that the cable is not validated. This is the default status.
Invalid
Specifies that the cable is missing a Part Number, From Device, or To Device data in 3D model. The missing value is highlighted in bold.
Valid
Specifies that the design basis cable has Part Number, From Device, and To Device data in 3D model.
Validate
Verifies if the selected cable has Part Number, From Device, and To Device data available in the 3D model.
Process
Imports or updates the selected cables. When you process the cables, the software creates the cables in 3D model and correlates with corresponding cable design basis data.
View Log
Displays a CreateEFCables.log file. The file contains information about successfully processed cables, and the cables that could not be processed due to data inconsistencies.
Include up-to-date cables
Appends Correlated and up-to-date cables to the current cable schedule.
Select All
Selects all the cables in the list.
Select Valid Cables
Selects all uncorrelated valid cables in the list.