Rotate Equipment Ribbon - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Equipment and Furnishings

Language
English
Product
Intergraph Smart 3D
Subproduct
Equipment and Furnishings
Search by Category
Help
Smart 3D Version
13.1

Sets options for rotating equipment in the model. You cannot rotate equipment along an axis that is constrained by predefined positioning relationships, and you cannot rotate equipment that is fully constrained. For example, you cannot rotate a pump that is mated to a horizontal reference plane and aligned with other pumps on either side, because in order to perform the rotation, one or more of these relationships is broken.

Rotation Point

Defines the origin point for the rotation of a piece of equipment. This point serves as a fixed anchor during the rotation.

Axes

Sets the geometrical axes to reference during the rotate operation. You can choose from the equipment's local coordinate system, the global coordinate system for the entire model, or any grid systems defined for the model.

Reference on Part

Instructs the system to use the selected part face or edge as the rotation reference, and selects the equipment's local coordinate system for the rotation of the part.

Reference on Model

Defines a reference in the model, and selects the global coordinate system for the rotation of the part.

Angle

Specifies the angle of rotation for the equipment. This option also dynamically displays the current angle during manual rotation.

Step

Defines an incremental value to use when rotating equipment. When you rotate equipment manually, the equipment only rotates to an angle equal to some multiple of the step value.

Close

Exits the command.