Set Options for Processing Data - Intergraph Smart 3D - Administration & Configuration - Hexagon PPM

Intergraph Smart 3D Geometry Analysis and Repair

Language
English
Product
Intergraph Smart 3D
Subproduct
Geometry Analysis and Repair
Search by Category
Administration & Configuration
Smart 3D Version
13

Perform the following steps when the Options Dialog displays.

  1. In the Acis Check Level box, select the level for the checks to perform. Level 20 is the simplest check, and Level 70 is the most thorough check.

  2. In the Acis Save Version box, select the version for the .sat file to save after running the Process Geometry Data Command .

  3. In the Points box, type the tolerance value that determines coincident points.

  4. In the Knuckles box, type the tolerance value that determines knuckled edges.

  5. In the Tangents box, type the tolerance value that determines smooth edges.

  6. In the Gaps box, type the tolerance value that determines how gaps are ignored.

  7. Click OK to close the dialog and accept the changes.

You can specify the precision for the tolerances by opening the Tools > Options Dialog, and then clicking the Units of Measure tab.