Place Grid Plane Ribbon - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Grids

Language
English
Product
Intergraph Smart 3D
Subproduct
Grids
Search by Category
Help
Smart 3D Version
13.1

Displays the available grid plane options when placing or editing a grid plane.

Properties

Activates the Grid Plane Properties Dialog.

Elevation Plane Position

Activates the Associated Elevation Planes Dialog. Use this dialog box to specify the elevation planes that the grid plane intersects where you want the software to generate grid lines.

Grid Plane Position

Specifies the intercept point of the grid plane to the axis.

CS

Specifies the coordinate system to which the grid plane belongs.

Axis

Identifies the coordinate system axis used to define the grid plane. The Axis value must be X or Y.

Type

Specifies the type of grid plane. You can define grid plane types in the reference data.

Reference

Defines the reference plane from which the grid plane is referenced.

Offset

Specifies the offset between the reference plane and the grid plane that you are creating.

Copies

Specifies the number of grid planes to create using the specified Reference plane as the starting point and the Offset as the distance between the grid planes.

Nesting Level

Defines the nesting level for the grid plane. You can select Primary, Secondary, or Tertiary. Between two adjacent grid planes, a difference of only one level is allowed. Therefore, secondary grid planes are only allowed between two primary grid planes. Similarly, tertiary grid planes are only allowed between two secondary grid planes.

SP3D_SHOW_hierarchy_PlaceGridPlaneRBN