AirCoolingCoil Sheet - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D HVAC Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
HVAC
Search by Category
Reference Data
Smart 3D Version
13.1

The AirCoolingCoil sheet in the HVAC.xls workbook defines the air cooling coils that you want to have available in the Catalog.

PartNumber

Type the part number for the air cooling coil. An example is AirCoolingCoil400x200x350.

SHARED Tip Part numbers for air cooling coils must be unique throughout the entire Catalog.

SymbolDefinition

Type the symbol definition for the air cooling coil.

FaceWidth

Type the face width for the damper for the air cooling coil.

FaceDepth

Type the face depth for the damper for the air cooling coil.

ComponentType

Type the component type for the air cooling coil.

PartDescription

Type a description for the type of part. An example is Air Cooling Coil 400x200 x350mm.

Width

Type the width of the duct.

Depth

Type the depth of the duct.

Length

Type the measurement of the length of the air cooling coil.

Thickness

Type the measurement of the thickness of the air cooling coil.

FlangeWidth

Type the measurement of the width of the flange.

SHARED Tip For the remaining properties, (i) indicates an integer corresponding to a nozzle number assigned to the cross section. This method avoids a lengthy listing for all possibilities, like Nozzle(1):CrossSection, Nozzle(2):CrossSection, and Nozzle(3):CrossSection for three possible nozzles. When you type the nozzle properties in the workbook, substitute a number for i to assign the nozzle to the appropriate property.

Nozzle(i):CrossSection

Type the related CrossSection object for the port.

Nozzle(i):EndPrep

Type the coded end preparation for the particular nozzle. Examples of end preparations include Threaded, Screwed, Plain End, Welded, Bolted, Female, Male, and Ferule. In the reference data, a number represents each type of end preparation (for example, 1 for Threaded, 2 for Screwed and so on).

Nozzle(i):Thickness

Type the thickness of the nozzle port.

Nozzle(i):FlangeWidth

Type the width for the nozzle for the air cooling unit.

Nozzle(i):FlowDirection

Type the flow direction for the nozzle.

Nozzle(i):PortDepth

Type the depth of the port for the nozzle.

Nozzle(i):CptOffset

Type the offset value for the component.