Rect_Sleeve Sheet - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D HVAC Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
HVAC
Search by Category
Reference Data
Smart 3D Version
13

The Rect_Sleeve sheet in the HVAC.xls workbook organizes facts for rectangular sleeves.

PartNumber

Type the part number for the sleeve. An example is RECTSLEEVE for rectangular sleeve.

SHARED Tip Part numbers for rectangular sleeves must be unique throughout the entire Catalog.

FaceDepth

Type the face depth for the object.

FaceWidth

Type the face width for the object.

ComponentType

Type the component type for the rectangular sleeve.

PartDescription

Type a description for the rectangular sleeve.

SymbolDefinition

Type the symbol definition for the rectangular sleeve.

Width

Type the width of the duct.

Depth

Type the depth of the duct.

Clearance

Type the clearance for the rectangular sleeve.

Length

Type the length of the rectangular sleeve.

Thickness

Type the thickness for the sleeve.

SHARED Tip For the remaining properties, (i) indicates an integer corresponding to a nozzle number assigned to the cross section. This method avoids a lengthy listing for all possibilities, like Nozzle(1):CrossSection, Nozzle(2):CrossSection, and Nozzle(3):CrossSection for three possible nozzles. When you type the nozzle properties in the workbook, substitute a number for i to assign the nozzle to the appropriate property.

Nozzle(i):EndPrep

Type the coded end preparation for the particular nozzle. Examples of end preparations include Threaded, Screwed, Plain End, Welded, Bolted, Female, Male, and Ferule. In the reference data, a number represents each type of end preparation (for example, 1 for Threaded, 2 for Screwed and so on).

Nozzle(i):Thickness

Type the thickness of the nozzle port.

Nozzle(i):CrossSection

Type the related CrossSection object for the port.

Nozzle(i):FlangeWidth

Type the sleeve width for the nozzle.

Nozzle(i):FlowDirection

Type the flow direction for the nozzle.

Nozzle(i):PortDepth

Type the depth of the port for the nozzle.

Nozzle(i):CptOffset

Type the offset value for the component.