Steel Connection Properties - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Hangers and Supports Data Driven Assembly

Language
English
Product
Intergraph Smart 3D
Subproduct
Hangers and Supports
Search by Category
Reference Data
Smart 3D Version
13.1
Standard Database for Smart Reference Data Version
2020 (12.0)

These properties specify the parts to use for connecting the support to the supporting object.

Base Plate 1 refers to the base plate for the main steel member and Base Plate 2 refers to the base plate for the brace.

All the Base Plate1 attributes apply to Base Plate 2.

IJUAhsBasePlate1::BasePlate1Part

Specifies the part number or part class of the first base plate. This must be a SmartPart 2 Port Plate. To select the part using BasePlate1Rule, do not type any value for this property.

IJUAhsBasePlate1Rl::BasePlate1Rule

Defines an HgrSupportRule that returns a part number or part class to use for the base plate. The hanger rule name or the ProgID must exist in the catalog. To select the part directly using BasePlate1Part, do not type any value for this property.

IJUAhsBasePlate1Ang::BasePlate1Angle

Specifies the angle that BasePlate1 should be rotated about the Z-axis of the port to which the plate is attached.

IJUAhsBasePlate1Off::BasePlate1Offset

Specifies the distance by which the base plate should be offset from leg1. BasePlate1Offset is applicable only when StructureConnection is set to either Lapped or Lapped-Opposite.

IJUAhsBasePlate2Off::BasePlate2Offset

Specifies the distance by which the base plate should be offset from leg2. BasePlate2Offset is applicable only when StructureConnection is set to either Lapped or Lapped-Opposite.

IJUAhsBasePlate1Off::BasePlate1Offset

Defines how BasePlate1Offset is measured. BasePlate1OffsetDef specifies the distance between the base plate and leg1.

IJUAhsBasePlate2Off::BasePlate2Offset

Defines how BasePlate2Offset is measured. BasePlate1OffsetDef specifies the distance from the center of the base plate to the edge of leg2.