Input Dimensions - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Hangers and Supports Data Driven Assembly

Language
English
Product
Intergraph Smart 3D
Subproduct
Hangers and Supports
Search by Category
Reference Data
Smart 3D Version
13

Use these properties to determine the total frame span and frame length.

IJUAhsFrameOffset1::Offset1Value

Specifies the distance that the member should be offset from the pipe. To select the offset value using Offset1Rule, do not type any value for this property.

IJUAhsFrameOffset1Rl::Offset1Rule

Defines an HgrSupportRule that returns the offset from the member to the pipe. The hanger rule name or the ProgID must exist in the catalog. To select the offset value using Offset1Value, do not type any value for this property.

IJUAhsFrameOffset1Def::Offset1Definition

Specifies how Offset1 should be measured. If you type an unsupported value or do not assign a value, then the software uses the default value that is 1. For I frame, this value is ignored and is always calculated from Pipe Center to Steel Center. The following values are allowed:

IJUAhsFrameOffset1Sel::Offset1Selection

Uses the hsSelection codelist in the HS_S3DAssy_Codelist.xls workbook to select Offset1 by either input or rule. Allowed values are:

  • By Rule - 1 – Offset1Rule is used

  • By Input - 2 – Offset1Value is used

IJUAhsFrameShoeHeight::ShoeHeightValue

Specifies the distance that the main steel member should be offset from the pipe. To determine the shoe height using ShoeHeightRule, do not type any value for this property.

IJUAhsFrameShoeHeightRl::ShoeHeightRule

Defines an HgrSupportRule that returns the shoe height. The hanger rule name or the ProgID must exist in the catalog. To determine the shoe height using ShoeHeightValue, do not type any value for this property.

IJUAhsFrameShoeHeightDef::ShoeHeightDefinition

Specifies how ShoeHeight should be measured. If you type an unsupported value or do not assign any value, then the software uses the default value that is 1.