Clamp Properties - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
Hangers and Supports
Search by Category
Reference Data
Smart 3D Version
13.1

IJUAhsClampShape::ClampShape

It is the string specifying the name of the clamp. The clamp name is required for the clamp to be drawn. For more information on clamp shape details, see Clamp Shape.

IJUAhsMulti2::Multi2Qty

Specifies the quantity of clamps. Clamps are not shown when Multi2Qty is set to zero.

IJUAhsMulti2::Multi2LocateBy

Specifies the location of the clamps. Individual clamps can be located in two ways.

1 - Relative to Center of the group
2 - Relative to Edge.

The exact meaning depends on the quantity of clamps. This value can be 0 (nothing), 1 (center), or 2 (Edge).

IJUAhsMulti2::Multi2Location

Specifies the distance for exact location of the clamps depending on Multi2LocateBy and Multi2Qty. This value can be either a distance to the edge, or a center-to-center spacing. For more information on multi position details, see Multi Position.

IJUAhsClampOff::ClampOffset1

Offsets the clamp(s) along the x-axis of the pipe.

IJOAhsClampAngle::ClampAngle

Specifies the angle that a clamp body rotates in counter-clockwise when looking along the positive X direction of the pipe port. ClampAngle overrides Angle3 in the Clamp Shape.

Illustration of Clamp Angle - Shoe Attributes

IJUAhsClampWidth1::ClampWidth1

Specifies the width of the lower side of the Clamp.

IJUAhsClampWidth2::ClampWidth2

Specifies the width of the upper side of the Clamp.

Illustration of Clamp Width1 and Width2 - Shoe Attributes

IJUAhsClampWidthSel::ClampWidthSel

Specifies the codelist value for the length of the Clamp.

The following values are supported:

1 = Auto - length is based on the length of the Shoe
2 = Input - length is based on the input from the occurrence.

IJUAhsClampLenOvrHng::ClampLenOvrHng

Specifies the overhang for the Shoe length. If the codelist value of IJUAhsClampWidthSel::ClampWidthSel is 1, then the length is based on the length of the Shoe. You can specify overhang and the IJUAhsClampLenOvrHng::ClampLenOvrHng attribute controls the overhang.

Illustration of Clamp Length Overhang - Shoe Attributes

IJUAhsClampDiameter1::ClampDiameter1

Specifies the diameter of the Clamp.

Illustration of Clamp Diameter - Shoe Attributes

IJUAhsClampBoltOff1::ClampBoltOffset1

Specifies the offset for Bolt1 from the center of the Shoe.

IJUAhsClampBoltOff2::ClampBoltOffset2

Specifies the offset for Bolt2 from the center of the Shoe.

IJUAhsClampBoltOff3::ClampBoltOffset3

Specifies the offset for Bolt3 from the center of the Shoe.

IJUAhsClampBoltOff4::ClampBoltOffset4

Specifies the offset for Bolt4 from the center of the Shoe.

IJUAhsClampBoltOff5::ClampBoltOffset5

Specifies the offset for Bolt5 from the center of the Shoe.

IJUAhsClampBoltOff6::ClampBoltOffset6

Specifies the offset for Bolt6 from the center of the Shoe.

Illustration of Clamp Bolt Offset 6 - Shoe Attributes

IJUAhsClampDiameter4::ClampDiameter4

Specifies the diameter of the Clamp including the liner.

Illustration of Clamp Diameter - Shoe Attributes

IJUAhsClampWidth4::ClampWidth4

Specifies the length of the liner.

Illustration of Clamp Width4 - Shoe Attributes