Insulation - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
Hangers and Supports
Search by Category
Reference Data
Smart 3D Version
13.1

Library Name: SmartParts
Workbook: HS_S3DParts.xls
Codelist: HS_S3DParts_Codelist.xls
ProgID: HSSmartPart,Ingr.SP3D.Content.Support.Symbols.Insulation
Part Name: Insulation
Part Description: Insulation SmartPart

Prerequisites

Ensure that these workbooks are available in the following location before you place the parts:

[Product Folder]\CatalogData\BulkLoad\DataFiles\

  • AllCodeLists.xls

  • AllCommon.xls

  • GenericNamingRules.xls

  • HS_System.xls

  • HS_System_Codelist.xls

  • HS_S3DParts_Codelists.xls

The HS_S3DParts.xls file provides sample SmartPart data and is available from the following location:

[Product Folder]\CatalogData\BulkLoad\DataFiles

Part Placement

To place a sample insulation SmartPart delivered with the catalog:

  1. Click Tasks > Hanger and Supports.

  2. Place a design support on a pipe.

  3. Click Place Part, and then select the design support.

  4. In the Select Part dialog box, select a part from Parts > SmartParts > S3D Standard > Insulation > Polyurethane Insulation as shown below:

Part Properties

Millimeters (mm) is the default unit. Use in at the end of dimensional values to specify inches. Ports are shown as points highlighted in red.

ProgID

HSSmartPart,Ingr.SP3D.Content.Support.Symbols.Insulation

Example: S3Dhs_Insulation sheet in HS_S3DParts.xls

Local Coordinate System

When using the Add Part command, the insulation displays in the most frequently used orientation with the above coordinate system. The route port remains at the origin (0,0,0).