Bolt / Pin Attributes - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
Hangers and Supports
Search by Category
Reference Data
Smart 3D Version
13.1

The bolt and pin attributes define the size and location of the bolt and the pin.

IJUAhsPin1::Pin1Diameter

Specifies the diameter of the bolt or the pin. If the value is zero the software does not draw the pin.

IJUAhsPin1::Pin1Length

Specifies the length of the bolt or the pin. If the value is zero the software does not draw the pin. The length is always centered on the port location.

IJUAhsHeight2::Height2

Specifies the height of the bolt centerline relative to the bottom of the lug. The height attribute also determines the location of the bolt graphic and the port. You can ignore this attribute if the RodTakeOut attribute is specified.

Straight Pipe Lug - Bolt-Pin Attributes - Height2