Corner Properties - Intergraph Smart 3D - Reference Data - Hexagon PPM

The corner properties define the specifications for each corner and use the following short codes:

• TL - TopLeft

• TR - TopRight

• BL - BottomLeft

• BR - BottomRight

The following properties are optional and are used for different corner shapes for the plate:

IJUAhsTLCorner1::TLCornerType1

Specifies the corner type for the top left corner of the plate. TLCornerType1 takes a codelist value defined in hsCornerShape sheet of the HS_S3DParts_Codelist.xls workbook. Similar properties are applicable for the other three corner types, TR, BL, and BR. Codelist numbers and the respective corner types are as shown below:

• 0 - None

• 1 - Rectangular Notch Corner

• 2 - Angled Notch Corner - XY Chamfer

• 3 - Angled Notch Corner - XY Edges

• 4 - Angled Notch Corner - X with an angle

• 5 - Angled Notch Corner - Y with an angle

• 6 - Rounded Notch Corner (Concave)

• 7 - Round Corner (Convex)

IJUAhsTLCorner1::TLCornerX1

Specifies the horizontal size of the corner shape.

IJUAhsTLCorner1::TLCornerY1

Specifies the vertical size of the corner shape.

IJUAhsTLCorner1::TLCornerRadius1

Specifies the radius of the corner shape.