JUAhsWidth2::Width2
Specifies the width of the vertical plate.
IJUAhslength2::Length2
Specifies the length of the vertical plate.
IJUAhsThickness2::Thickness2
Specifies the thickness of the vertical plate.
IJUAhsGap1::Gap1
Specifies the gap between the two vertical plates.
IJUAhsOffset1::Offset1
Specifies the distance between the edges of the horizontal and vertical plates.
IJUAhsVerPlSecStand::VerPlSecStand
Specifies the section standard for the vertical plate.
IJUAhsVerPlSecSize::VerPlSecSize
Specifies the section size for the vertical plate.
IJUAhsVerPlSecType::VerPlSecType
Specifies the section type for the vertical plate.
IJUAhsAngle1::Angle1
Specifies the rotation angle of the first vertical section along its x-axis.
IJUAhsAngle2::Angle2
Specifies the rotation angle of the second vertical section along its x-axis.
IJUAhsConnection1::Connection1
Specifies the cardinal point of the first vertical section, which determines the connection point of the steel section. For more details, see the CrossSectionCardinalPoints codelist in the Allcodelists.xls workbook.
IJUAhsConnection2::Connection2
Specifies the cardinal point of the second vertical section, which determines the connection point of the steel section. For more details, see the CrossSectionCardinalPoints codelist in the Allcodelists.xls workbook.
IJUAhsMirrored1::Mirrored1
Specifies whether the first vertical steel section is mirrored or not. If you do not specify, the software considers the section is not mirrored.
IJUAhsMirrored2::Mirrored2
Specifies whether the second vertical steel section is mirrored or not mirrored. If you do not specify, the software considers the section is not mirrored.
IJUAhsSecConfig::SecConfig
Specifies orientation of the vertical steel section, vertical or horizontal. Enter a codelist number from hsVertHoriz sheet of the HS_S3DParts_Codelist.xls workbook.