Place Support by Reference Ribbon - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Hangers and Supports

Language
English
Product
Intergraph Smart 3D
Subproduct
Hangers and Supports
Search by Category
Help
Smart 3D Version
13

Sets options for placing a support in the model.

 Properties

Opens the Support Properties Dialog, which is used to modify support properties.

Custom Form Definition

Opens the user defined form for an object that has a form defined. It is enabled only if a form definition is defined for the support being placed. If the support does not have the form defined, this command is not available. See User-defined Forms.

 Feature

Select one or more features or SIO routes for which you want to place a support. You must select at least one feature or SIO route. Click Reject to clear the selections and start selecting features or SIO routes again. Click Accept when you finish selecting the features or SIO routes.

The first feature or first SIO route that you select is the primary feature or primary SIO route. The software uses the cross section from the primary feature or SIO route to define the support plane. If you clear the primary selection, the second feature or second SIO route that you select becomes the new primary feature or primary SIO route.

 Position

Specify the location of the support on the primary feature or on the SIO route. This option is available only when using the Place Support by Point command.

Reference Position

Identifies where the supporting reference point is positioned. This reference point is used as the structure reference point, or the location of the structural connection. While selecting the reference point in this step, a single line (rubber band) becomes visible in the graphic view connecting the support position and the reference point.

Reference Orientation

Orients the structure reference point. It can be set up by either rotating the CS about its default Z-axis, or by rotating the CS about its Y-axis. These rotations are used to simulate skewed and/or sloping structure, respectively. You can specify the angles in the Angle control and lock it.

Finish

Places the support using the information that you provided.

Length

Locks the length of the support.

Angle

Defines the angle of the Reference Point Rotation.

 Reject

Clears all the selected objects and restarts the selection process.

 Accept

Indicates that the object selection is complete.

System

Select the parent system for the support that you are placing. You can create systems in the Systems and Specifications task.

  • For pipe supports, the default system is the parent system of the pipe you selected first. For other disciplines, the default system is the last used system.

  • The System command does not support SIO route supports.

Rule

Displays the support types based on the rules defined in the reference data. When you select this option, the software uses an Assembly Selection Rule to filter the available supports in the Type box based on inputs such as the pipe outside diameter, distance between the supported object and the supporting object, and whether the route is above or below the supporting object. Clear the Rule option to select any available support type from the catalog.

You or your project administrator have control over how the rules are defined. See Hangers and Supports Reference Data Help.

If you placed a support using the Rule option, and later the inputs to the Assembly Selection Rule (ASR) change, the software changes the support type to a new type if the selected support no longer satisfies the ASR.

Type

Sets the kind of support that you want to place. If you select the Rule option, the software lists support types based on the rules defined in the reference data. If you clear the Rule option, the software lists the last ten support types that you placed. Select More to select a different support type.

  • Type is not available for designed supports.

  • Type is not available for SIO support catalog parts.

  • Design is not available for SIO supports.

Change Support Configuration

Cycles through the available attachment types based on the feature or supported object and the support type. This option is not available for types that do not support multiple attachment types.