Output Lines for Pipe Length - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Isogen Isometric Drawings

Language
English
Product
Intergraph Smart 3D
Subproduct
Drawings and Reports
Search by Category
Help
Smart 3D Version
13
Isogen Version
13.0(2016)

Controls the number of lines used for output of pipe lengths. Used in conjunction with AText -537.

The form of length output on the material list is controlled by the Linear Quantity Style setting. However, in order to save space, it is possible to have a two line format. By default, Output Lines for Pipe Length is set to 1, which uses the default Linear Quantity Style setting. If AText -537 is being used, then Output Lines for Pipe Length must be set to 2.

AText -537 is used to indicate the new line by using the $ and the setting for the units indication to be output, as shown in the example below:

-537$m

13.5

m

m

-537$mm

13500

mm

mm

-537$FT

19.5

Ft

Ft

-537$FT

13.5

Ft (instead of 13.5')

Ft (instead of 13.5')

Defines:

Option Switch - N/A
I-Configure - MaterialList.UserDefined.SpoolTable.OutputLinesTube

  • Do not use AText -537 if pipe quantities are requested in Ft-Ins (13'-5") units.

  • If set, this AText takes over control of the units indication output on all styles of material list, as well as allowing a new line indicator to force two line output. If it is not set, then normal defaults apply.