Defines the separator used to delimit part number data on the user-defined material parts list.
You are only required to set this option if you have defined UNIQUE-PT-NO-SUFFIX-LIST or UNIQUE-PT-NO-LIST as columns in the material list output. Supported delimiter characters are listed below.
-
Blank
-
Comma ( , )
-
Semi-colon ( ; )
-
Colon ( : )
Example 1: UNIQUE-PT-NO-SUFFIX-LIST (Materials are accumulated and unique part numbers are enabled)
This example illustrates using the PT-NO field, with UNIQUE-PT-NO-SUFFIX-LIST showing a delimited list of suffixes. The sample output indicates that there are three pipes and two elbows that have matching properties and have been accumulated. Unique Delimiter is set to use a comma ( , ).
|
PART NO. |
PART LIST |
ITEM CODE |
|
|
1 |
1,2,3 |
PIPE1 |
|
|
2 |
1,2 |
ELBOW1 |
Example 2: UNIQUE-PT-NO-LIST (Materials are accumulated and unique part numbers are enabled)
This example illustrates an alternative to using the combination part number and unique part number suffixes. The sample output indicates that there are three pipes and two elbows that have matching properties and have been accumulated. Unique Delimiter is set to use a colon ( : ).
|
PART NO. |
ITEM CODE |
|
|
1.1:1.2:1.3 |
PIPE1 |
|
|
2.1:2.2 |
ELBOW1 |
Example 3: UNIQUE-PT-NO-LIST (Materials are not accumulated and unique part numbers are not enabled)
The following example output contains a delimited list of part numbers that have matching attributes. This option is particularly useful in avoiding extending material lists that can cause overflow drawings. Unique Delimiter is set to use a semi-colon ( ; ).
|
PART NO. |
ITEM CODE |
|
|
1;2;3 |
PIPE1 |
|
|
4;5 |
ELBOW1 |
-
On the material list, you use UNIQUE-PT-NO-SUFFIX-LIST with PT-NO. You use UNIQUE-PT-NO-LIST instead of PT-NO.
-
Setting this option is not required when the report type Format is set to Fixed.
Defines:
Option Switch - N/A
I-Configure - MaterialList.VariableLayout.UniqueDelimiter