Specifies the section orientation settings for the edge reinforcement profile part.
Position
Displays how the cross-section of the profile is attached to the free edge.
Primary Orientation
Displays which side of the plate to place the edge reinforcement profile.
Secondary Orientation
Displays the direction of the web thickness for symmetrical crossing-sections and the direction of the flange and web thickness for unsymmetrical cross-sections.
Parent System Type
Displays the object type of the parent system.
Offset
Displays the distance that the cross-section is offset from free edge or from the plate face.
Mounting Face
Displays the cross-section face to mount to the plate.
Load Point
Displays the cross-section load point through which the landing curve passes.
Start Connection Method
Specifies the method of connecting the profile to its plate, profile, or member boundary. By Rule is the default setting.
When you select the EndCutType aspect on the Format View Dialog, a glyph displays for the connection method on each side of the profile.
Other connection methods can be added as part of your reference data customization.
By Rule
The connection is determined by assembly connection rules defined for Structural Detailing.
No glyph displays.
Welded
Places a welded web and flange cut.
Cutback
Places a web and flange cut that are straight (not snipped) but are cut back from the bounding object.
Clip
Places a welded web and a snipped flange cut.
Snip
Places a snipped web and flange cut.
Lug
Places a specialized welded end cut.
End Connection Method
Specifies the method of connecting the profile to its plate, profile, or member boundary. By Rule is the default setting.
When you select the EndCutType aspect on the Format View Dialog, a glyph displays for the connection method on each side of the profile.
Other connection methods can be added as part of your reference data customization.
By Rule
The connection is determined by assembly connection rules defined for Structural Detailing.
No glyph displays.
Welded
Places a welded web and flange cut.
Cutback
Places a web and flange cut that are straight (not snipped) but are cut back from the bounding object.
Clip
Places a welded web and a snipped flange cut.
Snip
Places a snipped web and flange cut.
Lug
Places a specialized welded end cut.