Copy and paste a sketched opening - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Molded Forms

Language
English
Product
Intergraph Smart 3D
Subproduct
Molded Forms
Search by Category
Help
Smart 3D Version
13
  1. Click Select on the vertical toolbar.

  2. Select Openings in the Locate Filter.

  3. Select the opening to copy. You can select the opening in a graphic view or from the Workspace Explorer.

  4. Click Edit > Copy.

  5. Click Edit > Paste.

  6. Select Parent of in the Paste dialog.

  7. Select the plate system to receive the opening copy. You can select the plate system in a graphic view or from the Workspace Explorer.

  8. If you want to select a new sketching plane, select StructSketchInput in the Paste dialog.

  9. Select a planar plate system, planar surface of an extruded plate system, or grid plane to use as a sketching plane. You can select a plate system or gird plane in a graphic view or from the Workspace Explorer. You must select the planar surface of an extruded plate system from a graphic view.

  10. Click OK.

  • Parent for Naming and StructSketchInput must be parallel to the parent plate system of the original opening.

  • The original opening geometry is pasted to the new sketching plane in the same planar coordinates used on the original sketching plane.

  • Only the original opening geometry is copied. Dimension and relationship constraints on the original sketch are ignored. Use Copy Similar to copy constraints. See Copy by Family Command for more information.

  • The copied opening has no relationship to the original opening. Each opening can be modified independently. Use Copy Similar if you need a relationship between the openings. See Copy by Family Command for more information.