The following advanced opening macros allow you to place oval openings with two supports. The software positions a two-support opening by dimensions from the first and second support, and places the opening with respect to the local coordinate system.
2S Oval HxWxD Creates an oval opening with two supports. You can define length and width. |
|
2S Oval 500X250 Creates an oval opening with two supports. The length is fixed at 500 mm and the width is fixed at 250 mm. |
|
2S Oval 850x500 Creates an oval opening with two supports. The length is fixed at 850 mm and the width is fixed at 500 mm. |