-
Click Insert Split Command on the vertical toolbar.
-
For the Split Mode, select Single Split.
-
Click Feature Break on the ribbon.
-
Select the pipe feature to break.
-
Click to define the position of the feature break.
-
You can use Tools > PinPoint Command and Tools > Point Along Command to locate more precisely the position of the feature break.
-
When splitting using a feature break, no weld or connection is placed so the two- features combined represent a single pipe part. By using a feature break, you can stop heat-tracing, insulation, or a surface coating at an arbitrary location along the pipe instead of at a weld or other break in the line.